1 / 4
Funnel extension rain gauge / tipping bucket (weather station) — image 1
1 / 4

Funnel extension rain gauge / tipping bucket (weather station)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Funnel extension for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG). The…

Rating
0 / 5
Likes
5
Downloads
28
Makes
0
Views
657
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Funnel extension for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG).

The model has a groove that fits exactly into the edge of the rain gauge. I have filled this joint with silicone, so that the two parts are firmly connected and watertight. I used white PLA as the material and it still endures well now after almost two years (-10°C to +40°C). To prevent moisture from penetrating in winter and cracking the material in frosty conditions, I also smoothed the inside with silicone.

The extension increases the accuracy to exactly 0.1 l/m². I have compared the annual amount in the meantime with the official weather station in my area and have come to almost exactly the same result.

The extender has a footprint of 150x190 mm >> A = 0,0285 m2 >> 1 tip = 0,100 l/m2

You can also find the part to attach the entire unit to a pole here on thingiverse:
https://www.thingiverse.com/thing:3793472

Feel free to remix my Tinkercad-model:
https://www.tinkercad.com/things/9uwNDriIFqR

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

Yes

Supports:

Yes

Resolution:

200

Infill:

20


Filament:

Eryone PLA White

Category: Outdoor & Garden

Tags