Counting matching models…
It's basically a 1" pole mount for the popular European model of fence posts. The fit is very tight, you may want to use a hammer. It's intentional to make sure the station is as stable as possible.
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
** 9-Mar-19 Have tested with a 6000mAh battery and works fine. Removed the thread for the Thunderboard hole and changed it to support a UV Sensor stalk. I have removed the Thunderboard from the Remote unit back to the base unit. 18-Feb-19…
This brackets are replacement parts for your BMW (G20/G21/..) All-Weather Floor Mat and are used to hold the metal inserts around the BMW logo in place. I lost mine during a car wash and this part can't be ordered. I could have only…
This has been designed to fit my ALKO 8" jockey wheel with a tube body diameter of 48.10mm and diameter of 30.20mm for the handle hub. I find that rain enters the top thrust bearing and makes it harder to raise and lower the trailer and…
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
Lesson Plan and Activity As the final project for Introduction to Engineering Design, I was given the choice of what I wanted to do. I really enjoyed making print-in-place telescoping fidgets earlier in the year, so I wanted to revisit…
Featured on Hackaday , XDA Developers and Hackster! ESPTimeCast is a WiFi-connected LED matrix clock and weather station that: Automatically syncs the time via NTP Fetches live weather data from OpenWeatherMap Includes a mobile-friendly…
One of my RING Video Doorbell is mounted in the open and required some protection from the weather. This is a basic shroud that provides some protection form sun and rain. Printed in ASA for UV and Temp tolerance.
Mitsubishi pajero mini h58/h53 Weatherstrip belt lada 2108
This mounting bracket for a weather station based on a temperature and humidity sensor is mounted on a 38mm diameter satellite dish mount. We recommend printing with at least PETG material to withstand outdoor conditions. The bracket fits…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Complete instructions are in the zip file. This is a five-piece weathervane that can be printed in most any printer. You will also need a length of 1/4" shaft, 303 stainless steel preferred, a 1/4" or slightly smaller ball bearing and two…
Compact and durable Meshtastic/Meshcore node based on the RAK19003, a 33140 LiFePo battery, and an Adafruit solar charger. See parts list below. The gasket is intended to be made using 1.75mm TPU filament or using standard 0.070" oring…
Особенности модели: Материал: Имитация натурального дерева с текстурой, создающей уютную атмосферу Форма: Треугольная конструкция с открытой верхней частью для легкого доступа к корму Дренажная система: Специально разработанные отверстия…
I built the weather display enclosure shared by @TheMeanCanEH_1207348 and wanted to use a 906090 battery, but I found that there was too large of a gap around the battery. I made this little spacer to fill in the gap and keep the battery…
A compact weather station based on the Raspberry Pi Pico W , BME280 sensor and Waveshare Pico LCD 2" display. The project measures environmental data, displays it locally on an LCD, logs measurements, and provides a lightweight HTML…
A vintage American sedan captured in a monochrome style.
I needed to mount a temperature sensor outside and made a cover for it. with the teardrop shape you can face the perforation on the side toward it and get better I printed it in TPE-83A witch makes it relatively easy to remove the sensor…
Built around an empty filament spool, MajorDomo is a small geodesic dome lamp that sits by the door and answers one very practical question: "How should I dress to go outside?” You can never tell just how warm or cold it is just by…
These are a remix of Whistle for VF by jmalenko, with various text and images referring to icy conditions, including some Atlanta-specific text. Most of the whistles would fit any location, though. GLAHR, mentioned on one of the whistles,…
CYD Weather Dashboard Case & Stand This is a custom case and stand for the "Cheap Yellow Display" (ESP32-2432S028R) running a custom Weather Dashboard. It features a modular stand system and space for sensors. 3D Printed Parts I have…
Epaper 4.2" Weact Pilot Dashboard weather station I understand my dashboard code and function may not be usable for you. But at least you may need my case parts. All the other parts have been bought from aliexpress and picked cheapest…
Oil paint palette and template for cutting the cardboard sheet to be placed on top of the palette. Four No. silicone feet have been fixed to the underside to prevent slipping. It suits a 5 cm metal mixing palette.
Capture raw atmospheric power with this Storm Cloud with Lightning Strike , a dynamic weather-effect model designed to bring energy and drama to your displays. A dense, swirling cloud mass hovers above a jagged lightning bolt that crashes…
Enclosure for PCB project. Full description: https://github.com/happy12/ESP32_weather-chart
Remix of the Display Back for DIY Machines InkyPi Weather Display project that accommodates a Raspberry Pi 3b or 4b
This detailed nautical anchor sculpture features a realistic weathered and rusted finish, capturing the rugged character of aged maritime metal. The corroded surface texture and worn edges give the piece an authentic sea-worn appearance,…
Protect your marine networks while your cables are unplugged. Keep the salt air and corrosion away from your RJ-45 network connections. Works with Garmin, Lowrance, Raymarine, Simrad and Humminbird products. Also works with network…
This is the stand to hold the screen and electronics for the ESP32 E-Paper Weather Display designed by Luke Marzen. Details of the electronics and software components can be found on his GitHub page…
Housing for temperature sensor. Works with BIUWING brand and possibly others.
RAK19007 Weatherproof Meshtastic Node Case A rugged and compact weatherproof (not submersible) case designed specifically for the RAK19007 WisBlock board. This design features a highly organized internal carrier frame and custom TPU…
A unique 3D printable creation — this Dipole Antenna Feedpoint Cover, Weather Protection, Insulator Housing Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
This model is a protective shield for environmental sensors , designed to protect them from rain and direct sunlight exposure while allowing proper airflow for accurate measurements. The shield follows a stacked-cone (multi-plate) design…
Weather Vane to mount on a post or horizontal surface. To maintain a good balance I used 2x bearings (608ZZ ID 8mm OD 22mm H 7mm) with a spacer in the middle and then locked into place with spacer. You can use 3x bearings if you wish as…
DIY Word Clock with LED Matrix, ESP32 and Wi‑Fi A modern 3D‑printable word clock that displays time, local weather forecast, indoor air quality, calendar events, waste‑collection schedules, and even MSCI stock and Bitcoin trends. Live…
I mount my weather sensor on a window outside my office using 3M Command Velcro Strips. The existing sensor cover clip wasn't large enough to support the sensor (and cover) using a velcro Command strip, so I enlarged the clip. Props to…
In theory the cap should protect the connector from dust and moisture but I have not as yet added features for an O ring or otherwise to seal the water out. I used some dielectric grease to help with water protection for now. Printed with…
These NEW over-engineered Prusament spools are just so versatile! They normally assemble with bayonet-style twist-lock sides that require a 3D printable tool to open . This over-engineered lid system uses the spool's center hub (plus a…
This is a replacement mount for the solar radiation shield for the La Crosse weather station remote sensor probe enclosure model 925-1418. These units are the ultimate torture test for filament so at a minimum use PETG. ASA or ABS would…
Please select a filament suitable for outdoor use and strong enough to withstand the forces required when locking the socket. I printed this in PETG-CF, the result was very robust, the final print was then coated with clear lacquer to…
English version Here is a shelter for different types of sensors, such as temperature, humidity, or gas sensors. It is very easy to print and install, either on a pole or on a wall. Its height can be adjusted as needed by printing as many…
Update 15 jan. 25 updated SM error corrected Update 20 nov. 24 added SM, L and XL model I am an avid archer, archery-coach and -trainer. I shot many styles of bows (recreational and competitive) but mainly stick to barebow. Wisdom comes…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
UPDATE 31.10.2024 - Working DST switching, small simplifications of code, fritzing schematic, clearer and simpler instructions. -------------------------------------------------------- This is the most complex project I ever made! It took…
This is a 2x1-grid, half height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use…
7-segment time + date + weather display. Functions: Shows time + date + weather (temperature and humidity) for your location. You can choose in the settings if you want to have the temperature as Celsius or Fahrenheit value. All settings…
Hay un modelo comercial DIY del que puedes descargarte todo el software e instrucciones: https://github.com/thingpulse/docs/ Mi diseño está basado en una pantalla de 2,8 " a color y táctil, además de una placa D1 mini PRO. Las piezas son…
This holds the REYAX RYLR998 LoRa radio, for potting. Fits in a 18mm hole, has a slot for a 17mm O ring. Part of another larger project. This will be mounted to the top of a weatherproof box outdoors, with other electronics. Radio:…
Housing for a small weather station based on wemos d1 mini (ESP8266) and GY-30 and BME-280 sensors. provides data: - temperature - humidity - pressure - light intensity The illumination sensor cover should be printed in vase mode, from…
This is a way to remotely provide a battery supply to your WeatherFlow personal weather station. Project benefits are a few… Allows battery replacement without losing power to WeatherFlow. (replace 1 battery at a time) Allows batteries to…
I made this model because I just recently started 3D Printing and wanted a simple way to monitor the temperature and humidity in my room. What you'll need: • A Raspberry Pi. (I used a Raspberry Pi 4 Model B however any similar…
Description This is 3D printable and stacable model of weather shield which can be purchased on many shops like AliExpress or LaskaKit. It is compatible with LaskaKit Meteo Mini Meteostanice 2.0 and 1.0 versions. LaskaKit Weather shield:…
A weather vane for the street on a bearing of the brand 608, measuring 22x8 x7. The model is a national team. It can be assembled on glue. It is placed on a bolt or stud of 8 mm. The model has been printed and has been in operation for 2…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
Meshtastic Weather Station Node case compatible with the Acurite 06054 Stevensen Screen Node case with plenty of room for sensors Case snaps into screen securely but can be easily removed All connectors come out the bottom of the screen…
Weather station E6016 comes with simple mounting base for the wind sensor only which is not suitable for my needs. I've created a set of mounting bases for both sensors. The set is suitable for mounting on metal pole (I've used the pole…
I made myself corner water diverter as because of poor design current water divert does not keep all water away from wooden base, especially in corners, wood under does not like to be wet! Can be glued in place using silicone or montage…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Last Christmas, I realized I needed an additional vent (actually two, but this is one of them) for an electronics enclosure that ended up getting more sun than expected. I ordered one —specifically, the one that inspired this design— but…
Cool little portable weather display/ desk ornament using a Pico Board, .96in oled, dht11, bmp280, and 600mah lipo battery/module. wanted to test how secure meltable posts are on components, everything fit perfect and securely when melted…
This is the start of my collection of blanks for the Apache series weather proof cases from Harbor Freight. Apache 3800 Lid/Base
After 11 years of outdoor use, my Bresser weather station needed major maintenance because some of the plastic parts had become porous and broken due to wind and weather. So I gave the weather station a second chance and designed the…
Weather vane to determine wind direction. To fit AS5600 magnetic rotation sensor and 608Z bearing. Hub is made up of four parts: -Cap to hold bearing -Body to house AS5600 sensor -Base to attach to substrate with hole for cable -Cover to…
It's basically a 1" pole mount for the popular European model of fence posts. The fit is very tight, you may want to use a hammer. It's intentional to make sure the station is as stable as possible.
This cover is designed to protect the LED string connector on one of the best-selling holiday string lights in Iceland. It shields the connector from the harsh weather conditions we often experience here. The housing has internal…
this a holder or cover to fix a eve weather to a 18mm board .. the fusion360 model is changeable to use the cover for anything you want :)
Weather station housing for DIY weather station sensors. There is two versions. One with the holders and one without. Middle sections you could print as many as you need ( example in the pictures has two ). There is also a sensor holder…
Dimensionally accurate design that can be printed and used without any painting or post processing. Switch body printed in matte dark grey PLA, though can be printed in any colour and painted Body printed with 0.15 layer height, 100%…
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
Some of the screws were broken in my weatherproof box. I designed this as a replacement part. I printed mine using PET-G, in a horizontal orientation and with the screwdriver slot vertical so that the stresses wouldn't cause it to…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to 3D Print and/or Laser cut an ESP32 WiFi connected Weather Forecasting Theatre with E-ink Display. Meet WeatherBot, my WiFi…
Remixed the housing from JT https://www.thingiverse.com/thing:2820147 in order to support: ESP32 Feather Huzzah with 2.4" TFT Wing Bosch BME280 sensor Sensirion SPS30 sensor Source code can be found here:…
Introducing the Rugged Hex Box: AquaShield I’ve combined my admiration for Whity’s Rugged Box design with my passion for hexagonal patterns to create a versatile weatherprove outdoor storage solution. Perfect for activities like sailing,…
These two shrouds can help protect from snow or rain on the ends of all-in-one Chinese diesel heaters such as made by Vevor. I printed in TPU so if I bump the shrouds, they would hold up and not crack/break like can happen with PLA. I…
Stumbling upon the Weather Station projects on this wonderful site, I got inspired by the idea but realized I’d have to start everything from scratch. Perhaps someone will appreciate my take on this concept. Here, you'll find both STL and…
Aqara T1 sensor in a nice housing, protection against almost all weather types. Easy maintenance by unscrewing the T1 holder to replace a battery for example. Printing, I used organic supports, overhang threshold at 30 degrees. Used…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Halterung für eve weather. Die Halterung kann auf den Untergrund geschraubt werden (3,5 x 25 mm) oder geklebt werden (Postit). eve weather enthält auch einen Feuchtesensor, dafür ist der Freiraum an der Hinterseite gedacht. Der Parmeter…
Raspberry Pi Pico Gadget Weather Station Project With this gadget I monitor the air quality in the office, obtaining quite accurate data on CO2 and tVOC as well as ambient noise, temperature, pressure, humidity and amount of light.…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 15 % / Support No Zusätzliches Material / additional material: 6x srew 3,5 x 40 mm Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a…
Funnel extension for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG). The model has a groove that fits exactly into the edge of the rain gauge. I have filled this joint with silicone, so that the…
Stevenson screen for the temperature sensor of my weather station (BME280 and an additional Thermistor, but works of course also with DHT11/DHT22 or similar sensors). I printed it with white PLA and have no problems after about 12 months,…
Bracket for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG). It's designed for a pole diameter of 37.5 mm. Now that I know how the rain gauge works, I would prefer to print the rain gauge myself.…
![[ALCH] Tamiya weathering system organizers (ModuBox)](https://media.printables.com/media/prints/467303/images/3830634_968f4a2c-575e-416e-8d5f-3b7c05243e80/alch-tamiya-weathering-2.jpeg)
