3.2 TFT Screen Case (Weather Station)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SD card holder and all PCB connectors pins have to be desoldered from screen. Also I'm using USB type C instead of…
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 235
- Makes
- 0
- Views
- 1,537
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SD card holder and all PCB connectors pins have to be desoldered from screen.
Also I'm using USB type C instead of micro USB connector which is on Wemos board.
You can print Stand.stl if you want to have it on the desk. Or you can print Wall_mount.stl if you want to have it on the wall. Use stickers to mount that part to wall.
Dimensions without stand: 95 x 60.2 x 13.8mm
Parts:
- 3.2 TFT Screen
- Wemos D1 mini
- Female USB type C board module
- Male micro USB
- Wires
- 4x M3x5mm screws
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20
Notes:
PCB_cover.stl should be printed with 0.1mm layer height
Category: Electronics