3.2 TFT Screen Case (Weather Station)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SD card holder and all PCB connectors pins have to be desoldered from screen. Also I'm using USB type C instead of…
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 235
- Wydruki
- 0
- Wyświetlenia
- 1537
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SD card holder and all PCB connectors pins have to be desoldered from screen.
Also I'm using USB type C instead of micro USB connector which is on Wemos board.
You can print Stand.stl if you want to have it on the desk. Or you can print Wall_mount.stl if you want to have it on the wall. Use stickers to mount that part to wall.
Dimensions without stand: 95 x 60.2 x 13.8mm
Parts:
- 3.2 TFT Screen
- Wemos D1 mini
- Female USB type C board module
- Male micro USB
- Wires
- 4x M3x5mm screws
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20
Notes:
PCB_cover.stl should be printed with 0.1mm layer height
Category: Electronics