1 / 8
Kestrel 5700 weathervane
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple Weathervane for Kestrel 5700 Fully inspired by https://www.thingiverse.com/thing:2444368 changed to…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 174
- Makes
- 2
- Views
- 1,598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
This is a simple Weathervane for Kestrel 5700 Fully inspired by https://www.thingiverse.com/thing:2444368 changed to use cheaper and highly available materials.
Changes:
- Hole is designer for 6mm x 6mm stick (highly available in my area)
- Smaller bearing 608 2RS 8x22x7mm
- Clear tail without text
- Place for 10mm level
Supplies needed:
1x bearing 608 2RS 8x22x7mm
22cm slat 6mm x 6mm
1x hex nut 1/4 <= for tripod
Supports:
No (v2 yes)
Resolution:
0,2
Infill:
20
Post-Printing
After printing, I glue the bearing holder and paint everything. Then glue level and put everything together.
Category: Sport & Outdoors