Gill Shield Weather Station case for RuuviTag
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.05 – €2.51 net (excluding VAT)
For file: ruuvi_screen_roof_0.2mm_PLA_MK3S_2h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.28 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 2.26 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Weather protection with a 3D-printed gill shield for RuuviTag sensor.
- Rating
- 4.714 / 5
- Likes
- 83
- Downloads
- 521
- Makes
- 10
- Views
- 4,410
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Weather protection with a 3D-printed gill shield (Stevenson screen is a box) for RuuviTag temperature/humidity/pressure sensor. Basically a DIY bluetooth weather station.
- Keeps the water out yet enables the air and bluetooth to go through!
- Opimized to be printed upside down without supports or rafts.
- Optional roof-plate with Ruuvi logo. If you plan to install this somewhere with direct sunlight, use full white roof to get more accurate readings.
- Modular design that allows as many "ring" sections to be used and made as tall as possible.
Minium combination
- floor
- ring
- tag holder
- roof
Weather station in the pictures has 3 ring units. Filament and weight calculations above contain 3 rings and match the images.
Notes:
Roof has M5 threads, add 3x 90mm pieces of 5mm threaded rod, assemble tag-holder and 3 rings, floor and nuts to underneath the unit to hold it together.
- Tag holder has a slot for double sided tape to hold the sensor.
- Tag-holder has a slot for screwdriver to allow battery change of the sensor.
- Has to be printed from white filament not to heat up too much in direct sunlight
- Preferable PETG or ABS in order to last outdoors.
- 1,0 mm elephant's foot compensation worked nicely for me.
How I Designed This
About 106 mm diameter, plate separation of 13 mm. Can be screwed into M10 thread.
Bottom has holes for potentional drainage and to create convection in direct sunshine.
Licence
I've licenced this free for anyone to make, aslong as they don't profit from my work (fine to charge filament/print time from friends for example). If you want to use the model commercially, please contact me.
I have gotten permission from Ruuvi Innovations Ltd to use their logo. Note that this is not their official product.