Counting matching models…
Weather protection with a 3D-printed gill shield (Stevenson screen is a box) for RuuviTag temperature/humidity/pressure sensor. Basically a DIY bluetooth weather station. Keeps the water out yet enables the air and bluetooth to go…
Wall mount for Ruuvitags. You may want to scale it up a bit to make the clips more durable. Two variants with 1 mm and 2
I wanted simple enclosure for standard RuuviTag to be used as a weather station outside my apartment. It is a classical Stevenson screen type shield to measure the temperature, humidity and air pressure with minimal interference from sun…
You need 2x M3x10 screws and 2xM3 thread inserts to assemble.
Simple enclosure for RuuviTag sensor. I needed a enclosure for outdoors so nobody could just grab it. I made this thing that has case and backcover. It is a bit snug fit and be careful when placing RuuviTag sensor in the backcover. Print…
Introduction I have been using Ruuvitags for all sorts of purposes over the years and attaching them has allways been a bit of a headache, so usually they just end up laying on the ground or jammed in some backpack pocket never to be seen…
Simple holder for RuuviTag. Nothing fancy here. This was designed for myself to use in ceiling and it will work in the wall as well. This has two variants: 2 or 4 screws Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
I wanted to keep my Ruuvitags on top of a molding on half paneled wall, but they kept falling due to slight angle on the molding. So I designed this mount to slide a thin spline between the molding and wallpaper keeping the Tag from…
I have Ruuvitag in every room of the house measuring and storing temperature and humidity. I also have several outside in the yard and several in my 3d printers measuring chamber temps etc. I try to always have CR2477 in stock, but…
A secure wall mounted enclosure for your RuuviTag for situations where you need your RuuviTag to stay put! Requires 4 pcs. M3 nuts and bolts and 4 pcs. countersunk screws for mounting. Definitely overkill! Print Settings Printer Brand:…
Designed in Tinkercad (https://www.tinkercad.com/things/jkLmJDJFKEW-ruuvitag-dimension-mock-up-and-holder). No need for supports. The holder tolerance is ~0.2 mm against RuuviTag actual dimensions.
Manufacturing instructions Material: PETG, PETG V0, alternatively PC Blend depending on application 3D Printer: Any FDM 3D printer, 0.4mm nozzle Slicer settings: no custom settings required, no supports. Post processing instructions: Use…
Proudly presenting a mount for the RuuviTag dev board. Didn't like using a zip tie to fix a tag on the board, switching tags sucked so I developed this mount. Sizes are adjusted to my printer and settings to get a perfect fit. If you have…
Added a HSW holder for a RuuviTag sensor. I got the best result by orienting the object diagonally on its back corner and using the tree supports like shown in the picture. Used Bambu Lab P1S printer and the print profile 0.16 mm High…
An extended bottom for the RuuviTag which fits a holder for two AA batteries. Move o-ring from the original bottom to this model, and use the original top. Change height in openscad file if needed. Make sure battery holder does not short…
Perno para sustituir las varillas roscadas de Gill Shield Weather Station case for RuuviTag Debe fijarse a presión a la tapa superior. Se puede imprimir con falda para tener una mayor superficie para poner cinta de doble cara y pegarlo en…
Manufacturing instructions Material: TPU, 85A or harder 3D Printer: Any FDM 3D printer, 0.4mm nozzle Slicer settings: no custom settings required, no supports. Assembling instructions Insert the RuuviTag Sensor Use zip ties, screw or hook…
Ruuvitag holder for flat surface and separate Biolan quick composter adapter for concave lid. Ruuvitag Pro has battery lid on its backside and screw attachment is not good for long term usage; every battery replacement wears the screw…
Bei 18 Pause Hinzufügen Magnete einsetzen
I have Ruuvitag in every room of the house measuring and storing temperature and humidity. I also have several outside in the yard and several in my 3d printers measuring chamber temps etc. I try to always have CR2477 in stock, but…
Manufacturing instructions Material: TPU, 85A or harder 3D Printer: Any FDM 3D printer, 0.4mm nozzle Slicer settings: no custom settings required, no supports. Assembling instructions Insert the RuuviTag Sensor Use zip ties, screw or hook…
An outdoor case for RuuviTag sensor with room for air flow. Provides protection from curious birds and other small animals. Tested on Prusa mini, Prusament ASA profile, 0.4 mm nozzle and 0.2 mm layer height. Screws together perfectly.…
A mesh case for RuuviTag sensor. Offers some physical protection if used, for example, in a ice cooler box. Tested on Prusa mini, 0.4 mm nozzle, 0.2 mm layer height and Prusament ASA profile and filament. Doesn't need supports. Depending…
This is a vertical stand/holder for standard RuuviTags. It is optimized for low filament usage while providing optimal foothold. It is in part inspired by the original RuuviTag stand. A standard RuuviTag should easily snap into the stand.…
A simple stand for keeping RuuviTag in its optimal position. Use 0.2mm layer height or smaller. Modeled in Blender by me.
