1 / 2
Realistic ribbon Christmas tree
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print realistic ribbon Christmas tree without supports.
- Ocena
- 4,8 / 5
- Polubienia
- 49
- Pobrania
- 227
- Wydruki
- 5
- Wyświetlenia
- 1031
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 5) (Komentarze: 7)Remiksy (0)Kolekcje (54)Powiązane
This is a mashup between DrJones's design "christmas tree" and my design "Ribbon Christmas tree".
While the original model weighed only 20g this one weighs about 80g;
the spring and the star are compatible between the two models.
I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports).
STAR VARIANTS
INSTRUCTIONS 🧰
MY SETTINGS
Nozzle : 0,4 mm
Layer height: 0,2 mm
walls: 3
top/bottom solid layer: 6
infill type: rectilinear
infill density: 15%(tree), 20%(the rest)
NO supports
NO vase mode
ASSEMBLY
- Stretch the spring a bit so that you can work with it better;
- insert the lower end of the spring into the first hole at the base of the tree, as shown in the photo;
- insert the lower end of the spring into the second hole at the base of the tree;
- insert the tip of the tree into the hole at the top of the spring;
- place the star on top of the spring;
- enjoy! 🎄
Tagi
decorationchristmasstardecordesignnewyearsupportlesschristmasgiftgiftspringeasytoprinteasyhomeminimalistribbontreecontestdecorationsnosupportchristmasornamenteasyprintchristmasdecorationchristmasdecorationschristmastreechristmasornamentshomedecoreasyassemblynosupportsneedednosupportschristmasdecorhomedecorationsupportfreenatalealberomolla2024homedecorationsalberodinatale