Liczymy pasujące modele…
The complete print consumes approximately 20g of filament (in my case PLA). I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports). STAR VARIANTS…
A while back I bought a set of ribbons from Amazon, but they came packaged on a piece of polysyrene. Once the ribbon was opened it ended up in a tangled mess that drove me mad, so I designed and printed a spool to hold it all. This is…
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
I recently needed a simple way to manage some over-long ribbon cables. This clip does the job for me. It could easily be scaled in the slicer for some additional sizes. If it is needed I can easily add extra slots or change sizes in the…
I've had two instances where the 20-pin cable responsible for the x-axis gantry stuff fail on me, so I made this easy to print clip-on strain relief bracket. The short ended clip should be inserted at the top, and the bracket should be…
Prints in 62 pieces (31 in each color) and assembles with glue sandwiched between the two color layers. I used PLA Gloop. Hangs on the wall with 5 large beehive hangers: https://a.co/d/e7QzTLL Requires glue and clamps for assembly Bambu…
Parametric Fusion file to create custom size TPU strap/ribbon sizes See this listing for sample sizes and more info: https://www.printables.com/model/1452926-tpu-straps-ribbons
Inlay (orange part, see photo) of the official Raspberry Pi5 case with a cut-out for the camera ribbon.
Print-in-place ribbon or vignette spool holder. Print without support Spool diameter: 70mm Spool core diameters: 25mm 40mm parametric Openscad for more sizes Print 2 pins for each pair of boxes, press into the side slots with force…
I've printed a few others and no one builds them stout enough so they all end up broken. This one is as strong as you'll ever need.
gift ribbon spool for 5mm wide ribbon glue it together you can put it on drill with 6mm hexagon bit notches for inserting ribbon Print settings 0,2mm layer 5 walls 15% infill no supports
Two piece spool for ribbon or other thin material. 9mm bore will fit 1/4" dowel. Has a 100mm diameter with 20mm barrel and 100mm flange. Will fit materials up to 36mm wide. Fitting is tight on my printer so a little force is needed to…
I attend Gen Con every year, and last year discovered that the adhesive on badge ribbons doesn't adhere well to fabric on badge wallets and such. I lost a ribbon chain as a consequence. I've designed this to hopefully eliminate that…
Yes, this model needs supports. Use organic supports. If you don't use supports, it will probably fail. Epically. It needs supports for the overhang at the base and the dome at the top. I set an overhang angle of 35 degrees. It also needs…
Because of how the customizer works, you'll need to download this and the original file( http://www.thingiverse.com/thing:484029 also included), change the line import("path\to\breast\cancer\ribbon") to wherever the file is, and then…
Show your support in a simple, practical way. These awareness ribbons are designed to slide securely onto a bag or purse strap, so you can wear them without pins, clips, or stickers. Features a smooth, slightly flexible design that holds…
Printed with TPU filament 2FS1 https://www.rcsb.org/structure/2FS1 1ULR https://www.rcsb.org/structure/1ULR Stand
This model was generated by scanning the original matching part by our Zeiss Metrotom CT Scanner at work by one of our Quality Engineers to save our IT department the cost of having to buy the whole assembly ourselves. Yes, it's a large…
A charming organizer designed with a soft ribbon bow shape, perfect for adding a delicate and stylish touch to your space. Ideal for holding toothbrushes, toothpaste, or small personal items, it combines functionality with a cute…
Creality Ender 3 S1 Ribbon Cable Support Pack Fits E3S1Pro and should fit Plus and Regular version of E3S1 series as well. My personal set have been going strong for over 6 months, with zero issues! No extra hardware is required! Most of…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
One thing that I have wanted to get for my vintage Futaba RipMax 4 transmitter, but couldn't find, was a ribbon antenna (clip) ....later to be found to be called a 'frequency penant or pennant'. I searched online for images & also ones to…
A box for storing tapes. There are 4 barbells. There are 2 large walls. Liner 2 pieces. fasteners with screws 4.2x15 (max 32 mm) A sushi stick is used as an axis.
I prefer a bolt up solution for Artillery ribbon cables. This is the excellent X3 cover (thing:6596529) from Bockobg Константин Димитров and thing:4881286. I basically cut the ribbon connector off both and merged the bolt on style using…
This is a "stay strong" awareness message support ribbon that is suitable for various causes. You can hang them on things, or print a bunch of them and chain them together like “barrel-of-Monkeys”. Easy to print requiring no supports and…
First little disclaimer. This part is not polished, additional revisions are likely. Please provide feedback. =) The idea behind the ribbon version is a lighter part (less than 14g) and potentially less harmonic distortion transferring to…
Update to this thing: https://www.thingiverse.com/thing:2126875 Added countersink for a screw attachment More configurable parameters Included STL of a clip that is sized for the Raspberry Pi Camera ribbon cable. I used this to route the…
그냥 버튼이에요 :) You can use it as a magnet when you attach a magnet, and you can use it as a button ribbon when you attach a button
Ribbon cable termination in pin-header cover/enclosure. Print two, as it will be mirror image when you put it together This is the third iteration of the design. Print Settings Printer: P3Steel Rafts: No Supports: No Resolution: .2mm…
Ribbon Bow Cake Topper Modern and simple cake decoration. Infill: 30% Layer Height: 0.18mm I used diffenent layer heights for the different colors.
three-layer ribbon:) If you liked it, please leave a review♡ means a lot to me
This model combines the MakerChip Croc Jibbitz by TechJeeper with the backing of the Pronouns Lanyard Badge by Marshsnake. Both designers did an amazing job. They NAILED their dimensions. Please be sure to check out their work.
Remix of nokiri design with the joints redesigned and easier to print. I sized it down also so it would fit on my E5P.
This model is compatible with the lego system.
In recent months, I've been playing around with different direct drive extruder configurations on my Tronxy XY-2 Pro. I first installed an extruder kit from the now defunct Comgrow, who's function was to install a Sovol SV06 planetary…
I originally made this model for my friend Meg Rowe while she was in treatment for sarcoma. It originally sported the phrase, “Though She Be But Little, She Is Fierce”. Meg passed away in 2016, but the model has been carrying on her…
✨ AnkerMake M5C Rear Ribbon Cable Clip Enhanced Version ✨ Upgrade your setup with our improved 1mm thicker OEM spec ribbon cable clip! Designed for those looking to switch up the color of their components while preserving that factory…
✨ AnkerMake M5C Rear Ribbon Cable Clip 2 Tier Version ✨ Upgrade your setup with our improved 1mm thicker OEM spec ribbon cable clip! Designed for those looking to switch up the color of their components while preserving that factory…
A typical 2-row 2.54mm ribbon-cable connector is female. That is, the part on the cable has holes, the part on the PCB has pins. I needed a special application where where the part on the cable has the pins. Those are rare to get. However…
Big thanks to SERGIOJRF for uploading that cute cat model. My daughter asked me to add a ribbon for the tails so here it is. I printed it with 0.1 layer height, 0% infill and with 5mm brim. Although it was modeled around the tail the…
Bring them home. Hang this in your sukkah to raise awareness. Printed 0.15 STRUCTURAL PETG using PLA for support. Used Printed Solid PETG Bold Blue and Pruserment PETG Mango Yellow with some random white PLA for support. Some minor…
Christmas/special occasion present box with printed ribbon. Attach side ribbon with a drop of super glue to ensure they stay put. Lid is a snug fit so careful openning.
This flat, elongated gift box features a separate lid and base, designed to fit snugly together. The box is secured with two ribbons: one wraps around the width and the other across the length, providing a secure closure and an elegant…
My 15-year-old son is a springboard diver and occasional competitive swimmer. He had a competition today and I realized he's just accumulating his place ribbons on his desk. I wanted to give him a way to display them. Dimensions: These…
Ribbon candy shaped ornament. Use different color filament to make it look like ribbon candy. Supports are required.
The "Christmas Ribbon" vase brings the festive spirit of the holidays into your home with elegant charm. Its unique shape, reminiscent of a gracefully curved ribbon, adds a modern twist to traditional holiday decor. The deep red matte…
I'm ocd, wanted this cable to lay neatly without crimping it and possibly damaging it. The geeekpi & geekworm fin dimensions differ. I found the fin distances to be pretty inconsistent, even on the same case, so.. I included both versions…
Hang tag with cute ribbon! Print with ironing for best results. Pause at layer 7 to switch filament color for the ribbon. Enjoy! :-)
A frame for fixing 2 N52 magnets against each other. This particular frame is for 20x40x10mm (around 23kg of pull force) magnets with clamps for a foil ribbon at the ends. The ribbon width is 17mm, frame material is PETG printed with…
This cable guide is mounted to the z-axis and avoids collsions of the cable with other parts (e.g. with the large part cooling fan mounted to the x-axis). No additional cable guide (e.g. at the extruder) is needed to avoid any collisions.…
10cm long Christmas Bell cookie cutter. Printing Recommendations Print using a FDM 3D printer Recommended Materials PETG or PLA Print Settings Infill: 10% to 15% Walls/Perimeters: 3 or 4 for strength and sealing Layer Height: 0.15 to…
This is the shells used in old computer ports (the black ones that have a ribbon). the ones used on DB-9 ports inside computers. couldn't find them anywhere, and digi-key is sold out. so i made my own. standard print settings for PLA on…
Christmas Holly Leaf / Leaves – Decoration for present wrapping ribbons Feuille de houx - Decoration pour les cadeaux de Noel. Foglia di agrifoglio - Decorazioni dei pacchi regalo di Natale. Design: Modeled in FreeCAD from a sketch on…
The complete print consumes approximately 20g of filament (in my case PLA). I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports). STAR VARIANTS…
This is a mashup between DrJones 's design " christmas tree " and my design " Ribbon Christmas tree ". While the original model weighed only 20g this one weighs about 80g; the spring and the star are compatible between the two models. I…
fixed the stem of the ribbon.3mf 45°c cut print with 10mm brim, also made a version for the other. small for Fuganater's big for MagnumDanger's
Simple clip to be inserted between the ribbon cable and its holding brackets. When the printhead moves to the side of the bed, the ribbon cable tends to slip out of their holding brackets. With this simple model it is kept in place.
I used the stud from the MagnumDanger wreath set to quickly create a bow that prints flat with no supports needed. If you find you want more depth to it, it will snap easily onto another stud.
Smile face ribbon box 100x100x60 mm It is easy to print. You may play with colours or print it only in one colour. Supports are needed for the lid. Put paper ribbon in the box and pull out one end of it through some of the holes. You can…
Gift ribbons (two colours) three variants, set of nine Scale it according to your needs.
These simple shredders and curlers are super easy to use, won't last as long as the professional ones with the steel blades (be careful of cheap imitations - this will last many holiday seasons!) SIZES I have provided three sizes which…
It is easy to print without supports. You may play with colours or print it only in one colour. Put paper ribbon into the box and pull out one end of it through some of the holes. You can use the other hole to secure the end of the ribbon…
Here's an elegant, quick print for the tree. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be publishing a new ornament every day!…
This organizer holds up to 10 gift ribbons with additional drawers for small stuff. For the lids you need 8 x “Ribbon_organizer - Lid” and 2 x “Ribbon_organizer - Lid_side”. You need to insert filament through the lids and the base to…
Guides and clamps for the Sovol SV-07 print head ribbon cable. The cable will be routed in front of the gantry and not through the gantry. This reclaims the full Z range of 252...253 mm. Note that the curtain fan wiring may need to be…
Make your own ribbon-flowers to decorate your Christmas or birthday presents. tools you need: scissors stapler double sided tape or glue (hot glue works best) ribbon width for each size: S: ~5mm M: ~10mm L: ~15mm how to make your…
A while back I bought a set of ribbons from Amazon, but they came packaged on a piece of polysyrene. Once the ribbon was opened it ended up in a tangled mess that drove me mad, so I designed and printed a spool to hold it all. This is…
A simple cloud shaped label for wrapping gifts. Either write on the label with a maker or add text in Prusa Slicer.
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
I made a version of this ribbon that could be printed flat and made an adapter so that it could be centered on one of the "branches". Compatible with this wreath: https://www.thingiverse.com/thing:4676031 Additional decorations:…
Model A simple and quick solution for attaching flat ribbon cables to a 30x30 mm aluminum profile. Perfect for the display cable of a Prusa Mini! The following goals were pursued: Easy assembly Easy disassembly Reusable Secure hold Easy…
Really liked PrintCentral's Camera mount and case. I just wanted the ribbon to come out the bottom so I remixed the original design. I also modified to give the cable more room to let the lid shut but this might be due to the fact that…
Shield to prevent bent ribbon cables from scratching discs (common fault on Playstation 2 slims). Only compatible with laser model SPU-3170. Needs to be glued to the laser assembly (the console needs to be opened in order to do so…
This remix offers a variant of the LED digilogue clock using a 96 LED / meter strip, resulting in a clock diameter of 20 cm It is aimed to be driven by an ESP32 mini-C3, using the provided RLC.ino software However, WLED (and any other…
Set of 3D Printed Ribbon Loop Tools for Pottery This innovative set includes six different shapes of ribbon loop tools and five types of handles, which you can combine as needed using threads. This way, you can create a tool tailored to…
Simple Christmas Ribbon decoration. Needed for Christmas day. Print on ring side down with supports (minimal).
The Wago terminals allow for an umbilical setup to be quickly connected/disconnected for maintenance or cable routing. The ribbon cable passthrough is sized for a standard Raspberry Pi camera or display ribbon cable. Check out my…
When slicing the original model, I realised that the ‘blades’ are apparently designed for 0.2 nozzles. However, as I currently only have a 0.4 nozzle installed, I modified the model slightly and widened the blades so that you can also…
Insert the anchor aligned with the extrusion, then rotate 90 degrees to lock. The loop is offset slightly to one side, so if it contacts something adjacent to the 2020 extrusion (like a panel), remove it, rotate it 180 degrees, then…
Use this to cleanly make a flat 90 degree turn with your Pi camera or display cable. Requires an M3x8 bolt and matching nut. Be careful bending ribbon cables, and try to only fold it once; they are fragile and folding them repeatedly can…
If you've moved your Raspberry Pi into the front drawer slot and added a camera, you probably have a long, messy ribbon cable hanging out of the front of your printer. I designed this low-profile clip to tuck that cable neatly under the…
I updated the extruder link to the ribbon cable. The top part was too thin, so I made it thicker. Assemble the piece like the original. Remix of this ribbon cable:…
Set of 2, 100mm x 60mm and 160mm x 60mm Easy to Print For the STL files. Split into Parts then click on objects, part 1 is the main body, all other parts are the ribbons and wings. Select all the ribbons and wings then click on others…
After printing in PLA, lift the parts off carefully as they are thin. You can form the parts with hot air, I used SMT hot air soldering kit that I also use to clean off any fluff on bigger prints. I find 345 deg F works good. Glued with…
Looking for a cute and versatile project? Grab our Vintage Heart Cake Box STL file! This heart-shaped box is perfect for crafting party favors, jewelry keepsakes, or gift boxes for bridal showers, Valentine’s Day, or birthdays. With its…
![Vintage transmitter frequency ribbon clip [Futaba]](https://media.printables.com/media/prints/707865/images/5553112_1bedcb25-d845-4e41-a46b-2480c7c83410_8bb58edf-0404-4372-a961-ac5e7838e28a/32a22ed883141684f8aed16d32154641_display_large_707865.jpg)
