1 / 5
S1 - S1 PRO Lower Z ribbon cable guide (NO HARDWARE REQUIRED, PRINT & PLACE) — zdjęcie 1
1 / 5

S1 - S1 PRO Lower Z ribbon cable guide (NO HARDWARE REQUIRED, PRINT & PLACE)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of two different models combined to make a lower Z ribbon cable guide for your S1/S1 PRO Attaches with no hardware

Ocena
4,714 / 5
Polubienia
109
Pobrania
843
Wydruki
16
Wyświetlenia
2292
Oceny
14

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A remix of two different models combined to make a lower Z ribbon cable guide for your S1/S1 PRO. I wanted something where I didn't have to use any screws/nuts to attach to keep the lower Z ribbon cable in place. I found two models that fit what I wanted and edited them in Tinkercad into one model.

Printed at 0.2 layer height on matte black PLA. I ran multiple tests raising and lowering my printer to the full Z height of 270 and it never moved.

To attach place the cable into the guide first then take the small lip and go into the Z extrusion and wrap around. Should slide right on and sit at the bottom. Be careful not to hit the hotbed knob in the back left corner as you place it. 

Tagi