1 / 5
S1 - S1 PRO Lower Z ribbon cable guide (NO HARDWARE REQUIRED, PRINT & PLACE) — image 1
1 / 5

S1 - S1 PRO Lower Z ribbon cable guide (NO HARDWARE REQUIRED, PRINT & PLACE)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of two different models combined to make a lower Z ribbon cable guide for your S1/S1 PRO Attaches with no hardware

Rating
4.714 / 5
Likes
109
Downloads
842
Makes
16
Views
2,290
Reviews
14

Updated at source:

Model information

License
Creative Commons — Attribution

A remix of two different models combined to make a lower Z ribbon cable guide for your S1/S1 PRO. I wanted something where I didn't have to use any screws/nuts to attach to keep the lower Z ribbon cable in place. I found two models that fit what I wanted and edited them in Tinkercad into one model.

Printed at 0.2 layer height on matte black PLA. I ran multiple tests raising and lowering my printer to the full Z height of 270 and it never moved.

To attach place the cable into the guide first then take the small lip and go into the Z extrusion and wrap around. Should slide right on and sit at the bottom. Be careful not to hit the hotbed knob in the back left corner as you place it. 

Tags