Sleek Sprite Extruder Ribbon Cable Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new take on the ribbon cable strain relief.
- Ocena
- 5 / 5
- Polubienia
- 101
- Pobrania
- 982
- Wydruki
- 16
- Wyświetlenia
- 5559
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A new take on the ribbon cable strain relief for the Creality Sprite Extruder. ~6 grams in PETG.
See it in action here:
My print settings:
- PETG (print in the hotter range of your material for good layer adhesion, the overhangs are mild on this model)
- 0.4mm nozzle, 0.25mm layer height
- 3 walls, 4 bottom, 5 top, 30% triangular/grid infill
For those who are interested in replicating the same test, here is the Klipper test macro I used (for Ender-3 S1/S1 Pro) and my X axis limits (and you could load all the G commands in Marlin too).
[gcode_macro TEST_X]
gcode:
G28 # Home the printer
G0 Z100 F1200
G0 X-8 F4800
G4 P2000
G0 X250 F4800
G4 P2000
G0 X-8 F6000
G0 X-8 F8400
G0 X250 F10800
G0 X-8 F13200
G0 X250 F15600
G0 X-8 F18000
G0 X250 F19200
G0 X-8 F19200
G0 X250 F19200
G0 X-8 F19200
G0 X250 F19200
G0 X-8 F19200
G0 X250 F19200
G0 X-8 F19200
G0 X110 F12600[stepper_x]
step_pin: PC2
dir_pin: PB9
enable_pin: !PC3
rotation_distance: 40
microsteps: 16
endstop_pin: !PA5
position_min: -8
position_endstop: -8
position_max: 250
homing_speed: 120
If you are interested in why this probe mount exists and how it works, see https://www.printables.com/model/438224-x45-sprite-cr-touch-probe-zero-y-offset-mount-v11