Screwable Ribbon Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design I made in Fusion 360 because I received a spool of ribbon that was made out of paper, and quickly…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 208
- Wydruki
- 6
- Wyświetlenia
- 1046
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a design I made in Fusion 360 because I received a spool of ribbon that was made out of paper, and quickly fell apart. This is designed for about 5M of 18 mm wide ribbon. I will possibly made more versions to support other lengths and widths in the future!
All you need is to print 2 of the side pieces, and one of the center. I used tape to hold the ribbon to the center for winding. Hope you all enjoy!
Print Settings
Printer:
Elegoo Neptune 2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
0%
Filament:
Polymaker PLAMatte Black
Notes:
I printed it with 2 walls at .6mm with 5 top and bottom layers to have the sides of the spools solid. This works great, and should screw together no problem as long as you have decent tolerances!
Just some basic caliper dimensions in fusion, and 3 revisions until I had something that worked exactly how I needed and I am proud of!
Category: Organization