1 / 5
Prusa Buddy Cam bracket for original Prusa XL Enclosure print in place — zdjęcie 1
1 / 5

Prusa Buddy Cam bracket for original Prusa XL Enclosure print in place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a bracket for the Buddy Cam for the Original Prusa XL Enclosure.

Ocena
3,5 / 5
Polubienia
17
Pobrania
184
Wydruki
3
Wyświetlenia
871
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is my own model. A bracket for the Buddy3D Cam for the Prusa XL Enclosure.
I recommend using an angled USB-C plug, but the normal one should also work well. You will have to try it out a bit to find the best position for you, so it doesn't interfere and fits well.

supports: none required

Layer height: 0.2mm

Material: PETG, but I recommend a more heat resistant material like ASA, ABS or PC(CF). 

You will need: 

  • 2pc of M3x6mm hexagon or other head screws 
  • 2pc of M3 nuts (self-locking recommended)

IMPORTANT: To ensure that the camera fits properly on the mount, I recommend removing the rubber pads from the feet. These are only glued and easy to remove. 

Tagi