1 / 4
Drag Chain Clips adapted for a 10x15 chain for Flashforge Adventurer 5M (AD5M) — zdjęcie 1
1 / 4

Drag Chain Clips adapted for a 10x15 chain for Flashforge Adventurer 5M (AD5M)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drag Chain Clips adapted for a 10x15 chain for Flashforge Adventurer 5M (AD5M)

Ocena
5 / 5
Polubienia
33
Pobrania
259
Wydruki
0
Wyświetlenia
3253
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Link to the chain 

To install it, you will need:

1) Screw M3x10 ISO7379 (10mm is the size of the smooth part! To this length, 6mm threaded parts are added, a total of 16mm!) Or screw the limiter onto a regular M3x16, the file is available for download, but may require scaling along the axes depending on the type of screw. To tighten it onto the screw: I held the model with pliers and slowly screwed the screw into it

2) Screws M3x25 (x2)

3) Screws M3x15 (x2)

4) M3 Nuts (x2)

5) 15-16 chain links 10х15


<3

Tagi