Modular towel hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular wall towel hanger
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 154
- Wydruki
- 4
- Wyświetlenia
- 1618
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please, upload your printed parts here, i would like to see your prints.
I wanted some original look hanger for hanging towels in bathroom, so i did this.
You will need 1 base, 1 base(mirror), 1 iset, 6pcs of cover and 6 hooks for one hanger, inset should be installed between base and base(mirror) parts, drilled with template, hooks should be snugfit in place and they are flex enough to be removed after mounting, so you have few ways to change them.
The cover plate is made 3x lenght of the hook, so with a bit of counting you can make few look iterations. Whole lenght of the hanger assembled is 282mm or about 3and¾ perfect donut diameter.
There hould be no need for support, but feel free to use them if anything cannot be printed well.
And i am providing you the full Fusion file to have a chance to edit anything.