1 / 2
Skadis Holder for Skil Electric Screwdriver
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder that works with Ikea's Skadis pegboard for the Skil electric screwdriver and bits.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to hang my Skil electric screwdriver on my Ikea Skadis board, and also keep the bits that came with the screwdriver together. Found the excellent model on Thingiverse made by gpix13, which was originally made for pegboards, and I made it work for Skadis. I used the universal hook design made by CSD_Salzburg and added a friction clamp for the bits holder that came with the screwdriver to come up with this Frankenstein of a model.
Hope you enjoy!
Printing Notes
- You will need 2 x of “Skadis_Universal_Hook.stl” from https://www.thingiverse.com/thing:2853261/files
- Orient the model right-side up with the base of the model sitting on the bed. The hooks should be printed on their side.
- Print with any material you like (I use PLA, which was fine) and any infill (15-25%).
- You will need to enable supports for the bottom of the screwdriver holder.
- After printing, I recommend placing the hooks into the model first before attaching it to the board. It's a tight fit, so you may need to use some force!