Liczymy pasujące modele…
Capture a moment of focused precision with this 3D printable STL model of an Atlanta Hunter. This skilled archer figure is perfect for adding a dynamic and adventurous element to your displays or tabletop gaming scenarios. Usage & Links…
I am not a 3D expert, nor a carpenter. I am giving it a try. Just made this alignment device. you can install one of those DIALs to check the BLADE ALIGNMENT. Hope it is useful (it was to me). I printer in PLA (sunlu). Using 25% infill. 3…
Cordless tool battery adapter. Skil PWRCORE 20 Battery to Makita skins Extra hardware wire 9mm female fuse terminal x2 female fuse terminal x1 6mm male spade connector x2 M3 x10mm bolt & Hex nut Assembly should be self explanatory, reach…
Recommended Filament: PLA
This is an extremely niche project, but it lets you use a Ryobi battery to power a Skil Tower Light . Lowes was selling these lights for $50 each so I got two. One was left unmodified and the other was modified to use Ryobi batteries…
Vacuum adapter for an older Skil Professional 1400H1 belt sander. Enables connection of a standard vacuum hose to the dust outlet. Used to direct sanding dust into a vacuum system instead of dispersing into the air. Designed to fit the…
4x4 puzzle designed in onshape, adaptation from a Fusion360 design
Eyeglass Holder - designed for SkillsUSA There is the whole part and separated versions Regardless the TPU would have to be printed separately
These work great as a combination battery cover storage on a French cleat. Requires supports, organic work well. Used lightning infill to cut down on material. Not a lot of structural demands on this part. PETG or PLA is fine. UPDATE:…
The drive gear on my 65 year old Skil brand Belt Sander broke apart. The gear appears to be made of nylon that was (injection?) molded onto the drive shaft of the motor. I took dimensions from the broken parts as best that I could. The…
long version. Snaps rather snugly. I suggest making the tolerances a bit bigger. I like it and won't try printing again.
I scaled the size up to 105%, opened up the USB-C plug channel, and added another inner ring of holes for bits.
T-track insert for 10" Skil table saw. It fits with no side to side movement on my saw, but has enough up and down movement that it can be propped up with pennies or washers to be just proud of the table saw surface for gluing to jigs.
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Emisar DW4 mount snaps right into the Skilhunt HB3 headband! There's a ridge in the design that matches up with the headband grooves in the DW4 to…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Dual D2 holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the D2 headlamp to…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H53 or H503 mount snaps right into the Skilhunt HB3 headband! Works with H53 and H503 series headlamps. There's is a conformal design…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Sofirn HS10 mount snaps right into the Skilhunt HB3 headband! Works with Sofirn HS10 series headlamp. The width of the mount is made to fit between…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Emisar DW4 and Emisar D2 mount snaps right into the Skilhunt HB3 headband! The ridges of the headband mount align with the ridges on the DW4…
As with my other holders: The lids fit well. Turn the holder upside down and shake it – the lid will not come lose. Print in PETG if possible. All holders have space for two or six blades, depending on how many you usually need of each.
20 March 2026 - Version 02 is updated. The 2.5" end is now about 1.5mm larger to fit more snugly into tool exhaust vents. Tablesaw - SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00 Rigid Vacuum - Hose diameter…
T-Nut for Skil Table Saw model TS6307-00. I could not find any online that fit so I made one. Here it is. Basic but it works. Any printer can be used. I used 75% infill just to make it stronger but worked fine with 20%. It has clearance…
Etter en lovendring har nå privatpersoner anleding til å reservere seg mot uanmodet dørsalg (link til relevant informasjon: https://www.forbrukertilsynet.no/vi-jobber-med/forbrukertilsynets-veiledning-om-dorsalg ). Jeg laget et hendig…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Wurkkos HD10 mount snaps right into the Skilhunt HB3 headband! Works with Wurkkos HD10 series headlamp. The width of the mount is made to fit…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Skilhunt H150 mount snaps right into the Skilhunt HB3 headband! Works with Skilhunt H150 series headlamp. The width of the mount is made to fit…
I really like the original design but wanted to use them on 25mm bases. For some reason the original files would not print correctly for me so I ran them through Netfabb to correct them and they seem to print properly. So I took the…
Designed a very simple and quick-printing base for creating tongs for Pre-K children to practice fine motor skills. Made at the request of a Pre-K teacher, this ring allows for two large craft sticks (tongue depressors, 6"x.75") to be…
I printed the t-nut that byrontyler modeled and it fit my Skil TS6307 table saw perfectly. I just modified it to accept a 1/4"-20 bolt. I also included two additional versions of the model that use a multi-layer overhang to prevent the…
MADE FOR MY SHOP. Category: Signs & Logos
100x160mm sign, with art of a game controller and text reading “Combat Skillz” Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
Dimension is 30mm x 30mm x 3mm 3D printing settings: 100% infill I change the filament mid-print to get a dual-color print.
Ich habe einen Halter für den Akkuscheren Multi-Cutter 2900 AJ von Skil entworfen und gedruckt. Infill habe ich auf 60% gestellt beim Druck. Minimale Stützen fuer die Haken. Passt Super. Viel Spaß damit. I designed and printed a holder…
Just a tiny bit narrower and fewer, but counter sunk, holes.
The festool side does have the twist-to-lock feature. The adapter can also be stored under the table saw where the stock 90 degree elbow is stored. Dust collection performance is slightly reduced from using a smaller diameter hose, but…
Das ist ein Halter fuer die Akkus der Akkuschere von Skil Multi-Cutter 2900 AJ. Minimale Stützen Gedruckt in PLA+HS Viel Spass This is a holder for the batteries of the Skil Multi-Cutter 2900 AJ cordless scissors. Minimal supports Printed…
Das ist ein Halter für die Scheren der Akkuschere Multi-Cutter 2900 AJ. Es passen 3 Stück darauf. Gedruckt in Pla+HS. Viel Spass This is a holder for the scissors of the Multi-Cutter 2900 AJ cordless scissors. 3 pieces fit on it. Printed…
This is a zero-clearance table saw insert for the Skil TS6307 table saw. My saw came with a nice metal insert. But I made this one so I could have a zero-clerance insert, and also as a test print before making the dado blade version. PETG…
If you want to order a Mobile Legend hero model, we can help shape the character.
Drill bit holder that screws onto the Skil drill with an 12mm long M4 screw. The bit slots have space for 4x2mm magnets that can be glued in so the bits will not fall out of the holder.
Skil SD561201 Rechargable Screwdriver charging stand with 48 slots
This is a keychain of the rock band as called "SKILLET". A perfect gift for fans.
These are feet for a 10" Skil Drill Press(see pics). I needed some TPU feet so this drill press would not excessively scratch my work bench. Secure with CA glue.
This bit holder is made to fit a Skil cordless drill and uses the provided screw/screw hole on the base that holds the clip. The bits are just held in place by pressure.
I wanted to hang my Skil electric screwdriver on my Ikea Skadis board, and also keep the bits that came with the screwdriver together. Found the excellent model on Thingiverse made by gpix13, which was originally made for pegboards, and I…
Constructed using https://www.printables.com/model/916851-denali-screwdriver-holder-hsw model of the screw driver and the footprint of the bitholders and extension. Used gridfinity refined for the base. Changelog: v1 → v2: Added tolerance…
A simple wall mount for Amazon Basics screwdrivers. Holds the driver firmly. Print vertically for highest strength on clasp. Would suggest PETG and support for roof of bit block cavity.
Pixelated model of the fishing skill emblem in OSRS. Each “pixel” is 3mmx3mmx0.5mm, and the total model is 72mmx69mmx2mm. It is comprised of 4 layers to allow for multicolor printing without any interlayer color changes. There are 2…
Got a new AmazonBasics SKIL cordless screwdriver for Christmas, plus a set of toolant hex drill bits . Here's what I designed to store in on my pegboard. Holds the screwdriver, the bits that came with it, and the toolant bits. Cutout in…
Anime character Sui from the anime “Campfire cooking in another world with my absurd skill”. This model has a rounded bottom and will not stand on its own. the supports make a great stand if you leave them attached. PLA model about 2…
Russian Flexetki Skill Toy and antistress Can print 100% size this 159mm ore change size
Maximex Feuchtigkeitkiller 5kg (Wenko ?!) wurde nur mit einem Ablagegitter für nur einen Granulatblock geliefert. Hier könnt Ihr Euch noch einen zweiten ausdrucken.
Scaled ordinance model for the SkillsUSA Urban Search and Rescue Challenges. Dimensions are based on an old wooden model acquired years ago. Add weights (I used 22mm washers) and hot glue to the center to bring to the regulation 4.3 oz.…
There's storage for everything on the table saw, but for the allen key/screwdriver. Not anymore! It fits on multiple places on the legs. Print in PETG for it's flexibility.
As I developed a fundraiser/3d printing project for SkillsUSA regional, I created this kit card for printing and displaying on a desk. Remove part A Remove part B Put together
Witajcie! Przedstawiam uchwyt na baterie 18V firmy Erbauer oraz Skil! Pozdrawiam!
Witajcie! Przedstawiam uchwyt na elektronarzędzia 18V marki Erbauer oraz Skil. Pozdrawiam!
Die gelenkschonende Unterlage für die Tastatur Skiller SGK3 wurde speziell entwickelt, um den Komfort und die Ergonomie beim Tippen oder Gaming zu verbessern. Sie unterstützt die Handgelenke optimal und reduziert die Belastung bei…
No supports needed Holes in cover are for 6mm x 3mm (diameter x depth) magnets for magnetic closure. Holes in bottom of box are meant for screws for magnetic closure. They are countersunk holes in with a diameter of 5mm at an angle of…
This ¾" span wrench works with my SKIL 1820 Plunge Router to loosen and tighten the collet around the bit. Print in PETG with lots of walls and infill for a strong print
Original Printed at 250%. Different sized hands can scale as needed. Weight can be changed slightly with infill.
Highly recommended to print this in PETG as the material need to be flexible when attaching the hook onto the rail.
This device was originally designed for a child so they could visually see threading while developing fine motor skills. The sharps are all removed except the points that make contact with the build plate. I would suggest smoothing those,…
This fantastic mount is designed to hold the skill PWRCORE 12v batteries. They have a handy usbc 60W Input/ 60W output. We needed a 12V replacement for our electric start push mower and a bar mount makes this handy. Two 6mm Stainless cap…
Each color is a different height so a single extruder can be used. These were printed with .2 mm layer height. 0 mm - white 1 mm - yellow 1.6 mm - black
Ive Designed myself a Noctua 40x20 fan housing to cool my Ram as everything else in my PC is water cooled and all the 360 rads are in a rear chamber theres not really any air movement in my Thermaltake tower 900 apart from a top entry fan…
Rugged Modular Pencil Travel Case with Eskilstuna Smederna Speedway logo.
No tools necessary to assemble. Print 4x ring, 4x pin, 2x arc_wo_wall, 2x arc_w_wall The space between the walls 16mm Diameter of the ball I used in the video is 15mm
Watch this video for full install and details: https://youtu.be/ymzXKkLXK9s This great circular saw has only one weakness: no dust collection port. Today we fix that. Prints with no supports needed. If you print with 0.3 layer height and…
Designed for The Witcher: Old World board game, this is a full set of custom skill dice that replaces the original wooden cubes. Each die has a raised outer frame and an engraved symbol on top, representing one of the five core skills…
Elder Scrolls Betrayal of the Second Era dice trays with skill line logos. This is a remix of the dice holders from the excellent insert by davidsaurus (see:…
make the shell out of acrylic instead of 3d printing it so you can see through it.
I have a specific scissor. I could not find a fitted bin for it so I made this one from Seishin's OnShape Gridfinity Generator as a starting point. No magnets or screw holes. Link to OnShape if you want to copy and mod. Start from scratch…
Wer die mitgelieferten Staubfilter leid ist, sollte es mit diesem Adapter versuchen. Funktioniert sehr gut. Wurde aus TPU gedruckt
I am learning how to make articulated things and this is jus a test. please give me feedback on how I can improve.
This model is made entirely in 3D and has not yet been printed. Easy print has a particular design but is simpler to achieve than the square base 😉 It's a game of skill with a ball (any ball!). If there are several of you, use different…
I don't like the look of the cardboard tokens but also don't want the wooden ones, so decided to make my own. You can filament change to get the colours as the design is raised or you can just paint it like i did here. The official token…
Quick and easy print for the SKIL Twist 2.0 to hang on the Honeycomb Storage Wall. There are also 3 spots to hold bits. They are a little loose but function fine.
Now I redesigned it for (mainly) resin print. Version 1 could also be printed in FDM. Version 2 is almost full assembly and has thousands of supports. Maybe nothing for FDM. After removing the supports and smoothening the support-scars…
Overview When Skil stopped including battery covers with the USB-C version of their Skil PWRCORE 12 batteries, I searched high and low for a replacement but with no luck. So, I designed one myself, modeled after the OEM cover included…
After looking for skill markers, skill rings and all sorts of options I've finally decided to model one for myself because I've not found something that completely pleases me. This markers are basically small plastic parts which follow…
Remixed this from https://www.thingiverse.com/thing:6122834 to split the plate more evenly so it can be printed on an Ender 3 V2 Neo. Also adjusted the length by 2mm as original was noted to be 2mm short. Print Settings Printer Brand:…
This is a dado insert for the 8" ¼ SkilSaw portable table saw. The model only needs support on the tabs at the end and hex connectors. There are two versions , full printed on the XL or cut in half for the mk4 or other. PETG, ASA or HTPLA…
This alligator-shaped tweezer was designed to help children develop fine motor skills in a fun and engaging way. The friendly design encourages use in occupational therapy activities, educational games, and motor coordination exercises.…
The Skilhunt E3A is a nice tiny flashlight, but it is a little too tiny to find quickly in a car glovebox. I wanted something that would store well and include a spare battery. Hinges use M3x20 bolts.
Printed on a Creality K1 SE using default settings with Hyper PLA Black 1.75mm
Capture a moment of focused precision with this 3D printable STL model of an Atlanta Hunter. This skilled archer figure is perfect for adding a dynamic and adventurous element to your displays or tabletop gaming scenarios. Usage & Links…
I am not a 3D expert, nor a carpenter. I am giving it a try. Just made this alignment device. you can install one of those DIALs to check the BLADE ALIGNMENT. Hope it is useful (it was to me). I printer in PLA (sunlu). Using 25% infill. 3…
Designed a lid for Board Game Systems (@bgsystems) wooden skill token holder for Vantage. I liked this one a lot since it makes the best usage of space out of all the different ones I tested, and still fits inside the default cardboard…
Skill ring for the skills of your players
A stand for the Amazon basics rechargeable battery screw driver for your desk/workbench (loose fit).
It's a basic model for a cast iron skillet, with the option to swap the bottom plate out to customize it in any way you need to. Attached is a phone mount plate for an iPhone 16 max pro just in case you need it. The plate should just…
Laser 3d scan of the tool, 3d holder created in 3ds max, then exported to STL. Printed at 15% infill with 4 walls/perimeters. I just used PETG, i'm sure pla or asa would work identically.
