Skil Table Saw Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table saw rails for a wood cross-cut fence for the 10-inch Skil portable jobsite table saw
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed new rails for my table saw for a crosscut jig - made this model to attach a wooden board as a fence.
Two versions available, one with screw holes and one without. I do not know how this will perform without an actual fence attached to it, I think it might snap at the 90 degree angle between the rail and vertical section - the preferred version is the one with the screw holes.
Printed in PLA Plus:
0.4mm nozzle
0.2mm layer height
15% gyroid infill
2 walls
3 top/bottom layers
It may not be perfect for long-term use - but it should be good enough to tackle a few projects for sure.