Skil Table Saw Rails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Table saw rails for a wood cross-cut fence for the 10-inch Skil portable jobsite table saw
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 59
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed new rails for my table saw for a crosscut jig - made this model to attach a wooden board as a fence.
Two versions available, one with screw holes and one without. I do not know how this will perform without an actual fence attached to it, I think it might snap at the 90 degree angle between the rail and vertical section - the preferred version is the one with the screw holes.
Printed in PLA Plus:
0.4mm nozzle
0.2mm layer height
15% gyroid infill
2 walls
3 top/bottom layers
It may not be perfect for long-term use - but it should be good enough to tackle a few projects for sure.