Dust Collection Adapter for SKIL 10-inch Worm Drive Table Saw, going from 2.5" (ID 64mm) to 2.25" (ID 57mm) v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect 2.5" hose fitting to SKIL 10" Worm Drive Table Saw's 2.25" dust collection port. Prints with no supports. (v1.0)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Connect a 2.5" hose fitting to the amazing SKIL 10" Worm Drive Table Saw's 2.25" dust collection port. Prints with no supports. (v1.0)
I suggest printing with these settings:
- Filament type: PLA (I used PLA+)
- Nozzle diameter: can be 0.4mm or 0.6mm
- Layer height: 0.3mm
- Wall thickness: 0.6mm
- Number of perimeter walls: 3
- Infill: 30%
Note: The suggested layer height and wall thickness are normal for a 0.6mm nozzle, but can easily be done by a 0.4mm nozzle, in which your 0.4mm emulates a 0.6mm. This results in faster print times compared to normal settings for 0.4.
My PayPal tip jar: https://paypal.me/design8studio
Various LowRider 3 CNC remixes:
View all my models and remixes on Printables:
*Amazon product links are affiliate links.