1 / 4
Simple ARCA SWISS adjustable clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick (under 30 min) print to give you a sturdy and adjustable ARCA SWISS clamp. Comes in standard tripod head.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Arca Swiss clamps are quite big and, in my opinion, expensive. Sometimes, the applications don't warrant that at all - e.g. a small light/ phone mount/ mic.
That's why I designed my own clamp. Feature:
- Small and quick to print (under 30 min)
- Only requires 1x M4x30 screw and nut - super common
- Already modelled tripod screw - no need to bring your own
- Surprisingly sturdy, but your milage might vary
Notes:
- No guarantees for how much this will take in terms of abuse/ wight - do your own tests (in the video bellow I do test mine out - yours will depend on wear, filament, orientation, etc.)
- Best results: orient clamp pieces on their side, enable manual supports (to avoid the tripod head), print with many perimeters (up to filling the whole thing in them)
- PLA seemed to work for my application but there may be better materials out there
Hope you find this useful!!
Video + demo: