1 / 6
Anko 4.6L Filament Storage Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament storage solution of a 4.6L Anko Food storage box.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (7)Powiązane
Space for loads of silica gel and a bowden tune to connect directly to printer for maximum dryness.
Notes:
- The Roller is made of several parts, the main roller, the Roller Pin and 2 washers as well as 2 x 608 Bearing. It was made in multiple parts for maximum strength and ease of printing. If you have issues with the tolerances you can scale the part a small amount just make sure not to scale the length.
- The Bowen tube Pass Through is made of a TPU core and a harder outer component. Add a pause in the Tube Pass Through so you can insert the TPU core and have it captured.
- The Roller offset component is best printed in Filament PLA as it has a small foot print and is hard to print in ABS.
- The ridges on the seals should far towards the Anko box for the best seal.
- The Tube Plugs coming in closed and pass through options as well as 3 filament sizes depending on how well your TPU parts come out. I printed mind at the smaller 1.5mm size and the hole came out well undersized so I have included larger options. You want it to me fairly stiff so you get a good seal. Remove the plug when in use.
- Hole in the box is 32mm. If you need another size just ask.