Anko 4.6L Filament Storage Box

Space for loads of silica gel and a bowden tune to connect directly to printer for maximum dryness.

Notes:

1. The Roller is made of several parts, the main roller, the Roller Pin and 2 washers as well as 2 x 608 Bearing. It was made in multiple parts for maximum strength and ease of printing. If you have issues with the tolerances you can scale the part a small amount just make sure not to scale the length. 
2. The Bowen tube Pass Through is made of a TPU core and a harder outer component. Add a pause in the Tube Pass Through so you can insert the TPU core and have it captured. 
3. The Roller offset component is best printed in Filament PLA as it has a small foot print and is hard to print in ABS.  
4. The ridges on the seals should far towards the Anko box for the best seal. 
5. The Tube Plugs coming in closed and pass through options as well as 3 filament sizes depending on how well your TPU parts come out.  I printed mind at the smaller 1.5mm size and the hole came out well undersized so I have included larger options. You want it to me fairly stiff so you get a good seal.  Remove the plug when in use.
6. Hole in the box is 32mm. If you need another size just ask.