CCTV Camera Base support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for CCTV camera to spread the load on ceiling tiles
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
When fitting a CCTV camera to a tile in a suspended ceiling, this base will help spread the load to prevent damage to the tile. It will also help with alignment and drilling holes.
Three versions so far:
116mm: Three M4 (4.5mm clearance) mounting holes at 116mm (4.6") diameter suitable for many Hikvision cameras. Center hole for cables is 40mm. The mounting holes have a hexagonal recess to hold an M4 nut.
104.7-116mm: As above but three M4 (4.5mm clearance) mounting holes at 104.7mm and 116mm (4.6") diameter suitable for many Hikvision cameras with approximately 120mm base and larger.
128mm: Three M4 (4.5mm clearance) mounting holes at 128mm (5") diameter suitable for many larger Hikvision cameras with approximately 140mm base. Also includes four holes on a 83.5mm x 46mm (1.8" x 3.3") rectangle which is standard across many cameras and mounting brackets/boxes.
Happy to upload other versions for other mounting diameters.