CCTV Camera Base support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base for CCTV camera to spread the load on ceiling tiles
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
When fitting a CCTV camera to a tile in a suspended ceiling, this base will help spread the load to prevent damage to the tile. It will also help with alignment and drilling holes.
Three versions so far:
116mm: Three M4 (4.5mm clearance) mounting holes at 116mm (4.6") diameter suitable for many Hikvision cameras. Center hole for cables is 40mm. The mounting holes have a hexagonal recess to hold an M4 nut.
104.7-116mm: As above but three M4 (4.5mm clearance) mounting holes at 104.7mm and 116mm (4.6") diameter suitable for many Hikvision cameras with approximately 120mm base and larger.
128mm: Three M4 (4.5mm clearance) mounting holes at 128mm (5") diameter suitable for many larger Hikvision cameras with approximately 140mm base. Also includes four holes on a 83.5mm x 46mm (1.8" x 3.3") rectangle which is standard across many cameras and mounting brackets/boxes.
Happy to upload other versions for other mounting diameters.