1 / 1
Enclosure for Dig-Uno and Mean Well LRS-100-24v
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This enclosure fits a Dig-Uno and a Mean Well LRS-100-24v. Features a lid and cable strain relief.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (14)Powiązane
I created this enclosure to hold a Dig-Uno and a Mean Well LRS-100-24v. It features cable strain relief and has a removable lid. It was designed with the following hardware below in mind; the step file and Fusion360 f3d file are provided if you wish to customize it for other hardware.
Note:
The slots for the Wago 221-415 are not quite friction fits. You may want to secure them with some adhesive.
Hardware BOM
- 5x countersunk M3x8mm: https://www.aliexpress.us/item/3256805993813459.html
- 2x to secure PSU to enclosure, 3x to secure LED cable strain relief bar
- 3x M3 nuts
- To secure cable strain relief bar
- 4x M3 x D4.6 x L6.0 heatset inserts: https://www.aliexpress.us/item/225580004654359
- To secure lid
- 4x M3 screws
- To secure lid. 5mm up to 9mm length will work
- 4x M2 x 6mm
- To secure Dig-Uno to enclosure
- 1x zip tie
- To secure PSU cable to enclosure for strain relief
- Optional Wago 221-415: https://www.amazon.com/Wago-221-415-LEVER-NUTS-Conductor-Connectors/dp/B0107SYYGU
- has slots to fit up to 4x
- Optional 4x bump-ons 8x4mm: https://www.aliexpress.us/item/2251832240431576.html
- For outside bottom of enclosure