1 / 1
Enclosure for Dig-Uno and Mean Well LRS-100-24v
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This enclosure fits a Dig-Uno and a Mean Well LRS-100-24v. Features a lid and cable strain relief.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 1
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this enclosure to hold a Dig-Uno and a Mean Well LRS-100-24v. It features cable strain relief and has a removable lid. It was designed with the following hardware below in mind; the step file and Fusion360 f3d file are provided if you wish to customize it for other hardware.
Note:
The slots for the Wago 221-415 are not quite friction fits. You may want to secure them with some adhesive.
Hardware BOM
- 5x countersunk M3x8mm: https://www.aliexpress.us/item/3256805993813459.html
- 2x to secure PSU to enclosure, 3x to secure LED cable strain relief bar
- 3x M3 nuts
- To secure cable strain relief bar
- 4x M3 x D4.6 x L6.0 heatset inserts: https://www.aliexpress.us/item/225580004654359
- To secure lid
- 4x M3 screws
- To secure lid. 5mm up to 9mm length will work
- 4x M2 x 6mm
- To secure Dig-Uno to enclosure
- 1x zip tie
- To secure PSU cable to enclosure for strain relief
- Optional Wago 221-415: https://www.amazon.com/Wago-221-415-LEVER-NUTS-Conductor-Connectors/dp/B0107SYYGU
- has slots to fit up to 4x
- Optional 4x bump-ons 8x4mm: https://www.aliexpress.us/item/2251832240431576.html
- For outside bottom of enclosure