Counting matching models…
This is a QuinLED Dig-Quad case / enclosure remixed from https://www.printables.com/model/223377-quinled-dig-quad-v3-case. with some changes: Much smaller footprint without extra room inside. External antenna mount hole on side and lid.…
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only…
This is a remix of QuinLed Dig Quad case by subboo on thingiverse. See link to his design This a case for the quinled dig quad v3 with ethernet (abe) I include the step file if you wish to make changes. I provide a couple of variations.…
This is a remix of the original Enclosure. This is a snap together enclosure for the latest version of the QuinLED-Dig-Uno v3.1. The cover has been changed to accommodate the board antenna. More venting slots have also been added. The…
QuinLED-Dig-Quad V3 case that has plenty of extra room to allow for the heat it produces. This could be modified to include tabs for mounting on the outside ,but for now I only need a case with snap lid. I included both vented and non…
Whenever I build something using an ESP32 or Diguno I want to make it clean. There's never enough space in the case to do that. Everyone focuses on making it as small as possible and feeding in ugly wires from the outside. I've…
Designed to fit Mean Well LRS 350. Print Orientation: Face down Mounting Hardware: Dig Quad to mount 4x - Spacer 4x - M2.5 - 12mm Bolt 4x - M2.5 - Washer 4x - M2.5 - Nut Mount to PSU 2x - M4 - 8mm Flat head bolts (Button head also works)
This is my design for a minimalistic and clean 16 x 16 led matrix display with sound reactivity. It is designed to stand or to be hanged to a wall. BOM: printed parts 16x16 WS2812B RGB Digital LED Panel Flexible e.g.…
I needed a basic case to house my QuinLED Dig-Uno boards for various lighting projects around the house. This is my first attempt at creating a functional model using Fusion 360. More information about the Dig-Uno boards can be found at:…
Case for Quinled's DigUno WLED controller. uses pins to mount/hold the board in the case, no tooling required. You can melt down the pegs with a soldering iron to further secure, but it's not really going anywhere. Space for the wires to…
This mounting plate is made to attach a QuinLED-Dig-Quad LED controller to a DIN rail. It is a quick hack created by merging DIN Mount for Meanwell LRS-100-5 Power Supply with the hole pattern from the Dig-Quad v3 model . I printed this…
This is just a small and simple case for the QuinLED Dig-Uno LED controller. It snugly fits the regular ESP32 Module (PCB antenna) without issues, but it is no larger than it needs to be - the PCB antenna protrudes a few millimeters from…
This is a remix of the part from @andyshinn_194495 ,, QuinLED Dig-Quad V3 Case'' for a board without an external antenna I added space for: - QuinLED ESP32 (antenna) - Bigger holes for inserts M3 Built with Onshape and CAD publicly…
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350 or Meanwell LRS 600 (pick the STL for the correct PSU) The design has a in-cut on the bottom to allow for nuts/bolts to…
a roomy case for your QuinLED-Dig-Quad V2.
I needed a way to mount a QuinLED-Dig-Octa Power 7 and Brain board above a Mean Well LRS-350 PSU for a Christmas LED project. I designed the frame to hold the PCBs above the PSU, away from the cooling fan, whilst allowing the Power 7…
Sketched up and printed a small mount to hold the antenna for a QuinLED Dig Octa to keep it from dangling NOTE* you may want to adjust the scale a little larger. At stock size i found the two holes were just a little small due to elephant…
Snap together, wall mountable case for the QuinLED-Dig-Uno LED controller. Hole for external wireless antenna. Board is held in place in case by snapping lid in place. No screws are needed to secure the board in the case, but screws can…
This is an enclosure for the QuinLED-Dig-Uno LED strip controller. It has two base mounts. Designed with YAPP , a parametric projectbox generator for OpenSCAD. You'll need four M2x5 screws to secure the controller. There is a hole for…
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only…
All-in-one box for QuinLED Dig Quad lighting projects. Designed to fit: Meanwell LRS-200-12 (many Meanwell PSUs have the same footprint) Meanwell RS-15-5 QuinLED Dig Quad Noyito 30A 1 channel relay PG7 cable glands for x-connect LED…
Mounts for... - QuinLED Dig-Uno ...more info: https://quinled.info/pre-assembled-quinled-dig-uno/ - QuinLED Dig-Quad ...more info: https://quinled.info/pre-assembled-quinled-dig-quad/ - Mean Well RSP-320-5 300W (60A) 5Volt Power Supply…
A case for the Quinled Dig Uno by Intermit.Tech. Good project to DIY with digital adressable led's I use the board with WLED in combination with home assistant. Perfect combination.
This is a case for MeanWell LRS-150-12 and Quinled Dig Uno led controller with WLED software. FreeCAD ( RT ) file included.
Enclosure for the QuinLED Dig-Uno board. Both wireless version will fit, however the integrated wireless will leave a hole on the side where the antenna would be. There are two options for power, you can install female charger adapter…
Case for the awesome QuinLED Dig Uno Kit: https://quinled.info/2018/09/15/quinled-dig-uno/ Fusion 360 Design: https://a360.co/377oi2b
Case for Dig-Quad LED controller and Meanwell LRS-350-24 power supply, with 2mm banana plug back panel. There are three parts, the base, a lid, and a bridge that supports the Dig-Quad. The board can be screwed onto the board using m2.5…
Edit 10-30-2023 - Version with ears, only with 1mm centering holes so you can thread your own screws into this from the top. Edit 10-27-2023 - Added a 2nd model with Ears for more mounting options. Just a simple design to clean up my…
Case and lid with barrel jack and antenna holes, pegs for QuinLED Dig-Uno mounting, and space for connecting everything using wires terminated in ferrules. The lid fits a little lose to make removing it easier if the unit is mounted in a…
I decided to make a “quick” model of a Dig Quad v3 board and got carried away. Anyway you could import this STL into modeling programs if you are wanting to design your own enclosure/standoffs etc. I got the most critical dimensions…
I ordered my QuinLED-ESP32 boards with the headers attached from the factory and they put them on the bottom so I needed a deep case to hold it. This is my very first design and I know there are quirks with it. There's nothing that holds…
I wanted a nice enclosure for my QuinLED Dig Uno board and quickly put this together. Still a work in progress but it should all work! Variety of ventilation covers included (and one with no vents so you can make your own). Features:…
test enclosure Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20-30 Category: Electronics
This is a case and on/off button for an Esp8266 based LED strip driver on top of a QuinLED board, infrared sensor can be added.
I created this box with Fusion 360 for my DigQuad v3 controllers Step files included (because I always appreciate when people leave them) Mounting holes are sized for M2x5 Depending on how well your printer bridges, you may or may not…
Mount for the QuinLED-Dig-Quad V3, providing table-top use, IKEA Skadis mount, and screw mounting. Comes with four pegs for table-top, or a antenna mount in place of a leg peg. You can use the IKEA SKADIS Universal Hook from the…
this is QuinLED Dig-Uno case including single relay module, very com pack case you can get the relay from AliExpress
This is a project case I made for the QuinLED Dig Uno that provides inputs and outputs for a single WLED Strip. Case uses a single 2.1mm Barrel Jack for easy power infeed, a 2nd 2.1mm Barrel Jack for Power Output (to inject into the end…
Simple to print, print face down. Print 1x Dig Controller Mount 2x HP Strap Mount 4x Spacers This PSU Mount is designed to fit the standard hole dimensions for HP PSU The design has a in-cut on the bottom to allow for nuts/bolts to rest…
I wanted a good easily printable in one go mount for attaching the Dig-Octa system (power+brain) to a MeanWell Power Supply and have that whole lot mounted to the wall/shelf. It also needed to have the Wifi Antenna mounted on it just…
Quinled dig-next-2 wall mount slide in holder. 2 screws under led controller. Mount uses the existing wings on the side of the controller to slide into the mount and lock in. Snug fit. No supports needed. Print with front face on the…
Remove ESP controller, place quinled quad inside the case and connect the signal cables
This is a remix of the QuinLED Dig Uno v3.1 case over on Printables.
Designed a new custom case for the QuinLED Dig-Quad V1 board to specifically hold a microphone board for sound reactive LED displays using the sound reactive version of WLED. The top fins and side bump-outs make room for and protect the…
This is a snap-on cover for the QuinLED-Dig-Uno board. Covers all the status LEDs on the board even with the Ethernet board attached, allows for the wireless antenna to exit, as well as all the wires. Suggest printing on it's side, with…
The maker file I've included is setup to print on an X1C, but in general.. I used 0.16 layer height (0.2 should be fine), 3 walls like the original, and I had to use supports. The magnets should press fit in with some force and should not…
This is a remix of the model by @DamanFiscynk_1858241 and @andyshinn_194495. It is taller and has holes for the QuinLED-ESP32-AE+ terminal block and for mounting the external antenna supplied by QuinLED.
The power supplies I use to power my WLED boards aren't exactly safe; so we put them in a custom, purpose-made case.
The intent is for this to create a self contained unit that meets aesthetic approval for locations where having an exposed circuit board is not desired. I could not find a good solution, so I created one. These are designed to also allow…
This mount is designed to fit 3 Dig-Uno Controller boards, this will allow higher density in your box. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350, Generic PSU, and Meanwell LRS 600 The design has a…
Gehäuse für smarte LED Steuerung/ Housing for LED controller QuinLED-An-Quad. https://quinled.info/quinled-an-quad
A case for QuinLED-ESP32-AE+ retaining all functionality. Use M5 hardware.
This case is designed for QuinLED's An-Penta Board. I posted two “tops”, one that is marked for input/outputs. You need M3 threaded inserts (4mm tall, same used in most Voron parts). M3x20mm Cap head screw works best. You could fill in…
Maybe add supports for the hole :) credits: Thanks to the original uploader Trinitrogen @Trinitrogen_1371280 and the uploader of the remix MattDahEpic @MattDahEpic_487402
Case for QuinLED Dig-Uno. Remixed for easier and sturdier assembly.
Case and lid for QuinLED-Dig-Quad and standard power supply. Additional items needed to assemble: QuinLED-Dig-Quad incl. acrylic case power supply cables for connection 10x M3 hexagon nuts 6x M3x35 screws for mounting the lid 4x M3x10…
Quinled Dig Uno case with cherry mx button on top and a DC jack Category: Other
This is a case for a QuinLED-An-Deca LED controller. I had been looking for such a case for quite some time but couldn’t find one. So, I created my own using Tinkercad. The case has a very simple design and provides enough space for the…
In the original design the letters E and A had holes in them.
Case and lid for QuinLED-Dig-Quad and standard power supply. Additional items needed to assemble: QuinLED-Dig-Quad incl. acrylic case power supply cables for connection 10x M3 hexagon nuts 6x M3x35 screws for mounting the lid 4x M3x10…
Quinled dig-next-2 wall mount slide in holder. 2 screws under led controller. Mount uses the existing wings on the side of the controller to slide into the mount and lock in. Snug fit. No supports needed. Print with front face on the…
This is a QuinLED Dig-Quad case / enclosure remixed from https://www.printables.com/model/223377-quinled-dig-quad-v3-case. with some changes: Much smaller footprint without extra room inside. External antenna mount hole on side and lid.…
The maker file I've included is setup to print on an X1C, but in general.. I used 0.16 layer height (0.2 should be fine), 3 walls like the original, and I had to use supports. The magnets should press fit in with some force and should not…
