QuinLED Dig Uno V3.1 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a project case I made for the QuinLED Dig Uno that provides inputs and outputs for a single WLED Strip.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 41
- Makes
- 0
- Views
- 439
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a project case I made for the QuinLED Dig Uno that provides inputs and outputs for a single WLED Strip.
Case uses a single 2.1mm Barrel Jack for easy power infeed, a 2nd 2.1mm Barrel Jack for Power Output (to inject into the end of a long string), and a female JST-SM 3-pin (standard on most addressable LED strips) to connect to the head of the strip.
IMPORTANT PRINTING NOTE: the JST-SM connector is PRINT-IN-PLACE – Ensure you a pause for the print at a the layer height just before the top of the connector hole is bridged and place the JST-SM in place, then resume the print.