QuinLED Dig-Quad V3 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remixed small enclosure with mounting ears for the QuinLED Dig-Quad V3.
- Rating
- 4.75 / 5
- Likes
- 81
- Downloads
- 900
- Makes
- 8
- Views
- 3,956
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a QuinLED Dig-Quad case / enclosure remixed from https://www.printables.com/model/223377-quinled-dig-quad-v3-case. with some changes:
Much smaller footprint without extra room inside.
External antenna mount hole on side and lid.
Ears with #6 holes for mounting to wooden surface.
Rounded many edges.
Smaller walls so no infill with 3 line width on 0.4mm nozzle.
Best printed on a 0.4mm nozzle with 3 line width and 6 bottom layers to avoid any infill.
The non-vented lid and enclosures can be mixed together (ie. you can use a vented lid and non-vented enclosure together if you like).
Built with Onshape and CAD publicly available at https://cad.onshape.com/documents/6b332db414a2cafaa24c645e/v/cbb5aa0b48b9385bf61ca361/e/329efc048796baa588830a8b.
Minor Edit 12/11/2022:
I didn't add an opening for the ground terminal block on the edge of the board. That has been added now to both enclosure models. I also flipped the lid so it should lay flat by default now.
Edit 12/23/2023 (V8):
Updated the models to V8 which incorporates the updated builtin antenna space as well as removing the notch from the external antenna hole. It seems newer kits may have a different type of antenna that has no notch. Though, the simple hole should work for either.
Note:
This model doesn't fit the ESP32 with builtin antenna very well. But there is a remix that fit the builtin antenna ESP32 at https://www.printables.com/model/920281-quinled-dig-quad-v3-case-remix.