Sound Reactive QuinLED Dig-Quad V1 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom designed case for a QuinLED Dig-Quad V1 board configured to hold a microphone for sound reactive LED displays. I
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 578
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Designed a new custom case for the QuinLED Dig-Quad V1 board to specifically hold a microphone board for sound reactive LED displays using the sound reactive version of WLED.
The top fins and side bump-outs make room for and protect the microphone wires to vertically plug into the circuit board and mount on the side of the case.
I added the input and output wire clamps to the side of the case to help make the whole LED display and wiring more robust and uploaded a versions of the base with and without the wire clamps.
Recommend using 0.3 mm layer height, either PLA or PETG, and use 3mm screws for the LID and 5 mm screws for the wire clamps.