QuinLED Dig Quad Controller PSU Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dig Quad - QuinLED Controller PSU Mount
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 431
- Makes
- 2
- Views
- 2,355
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Simple to print, print face down.
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M2 - 12mm bolts/nuts (secure controller to mount)
Print Settings
Notes:
Print Settings
Nozzle: .4mm (.6mm or larger will work too)
Layer Height: .32mm
Perimeters: 3
Solid Layers: 4 top/bottom
Infill: 10%
Speed: Standard, but slower is better for the support brackets
Category: Electronics