QuinLED DigQuad v3 and Relay Standoff
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple standoff to help organize your wiring.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 76
- Makes
- 0
- Views
- 580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Edit 10-30-2023 - Version with ears, only with 1mm centering holes so you can thread your own screws into this from the top.
Edit 10-27-2023 - Added a 2nd model with Ears for more mounting options.
Just a simple design to clean up my wiring box, a simple standoff.
Dig Quad holes are 94.310mm long. "Left" side is spaced 41.808mm and the “Right” side is 32.322mm as per document https://quinled.info/quinled-dig-quad-board-dimensions/
Relay holes are 20mm wide and 40mm deep (overall relay board is 25mm x 45mm
You Can use M2.5 or M2 screws at 8mm long and the nut will sit flush with the bottom of the model so you can mount flat.
Hex Cutouts to reduce amount of Resin/Filament required, but you can also use a screw/washer to secure the standoff into your case/wall.