1 / 2
Simpler Handle Edit of Sandford Prime's PiP Butterfly Knife/Balisong — zdjęcie 1
1 / 2

Simpler Handle Edit of Sandford Prime's PiP Butterfly Knife/Balisong

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I just edited the handle to have no serration or cutouts. Everything else is the same.

Ocena
5 / 5
Polubienia
5
Pobrania
107
Wydruki
1
Wyświetlenia
459
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution

If you're finding this by itself, be sure to see the original first: https://www.printables.com/model/846554-butterfly-knife-print-in-place-balisong

This is just a small edit to the original. I altered the handle to remove the serration and diamond cutouts.

==== My Print Settings ====
You obviously don't have to use these settings. But, in my print, I used 100% infill, tree supports, and made sure to manually set the printer 50% speed after it got about halfway done. It's pretty heavy with 100% infill so a bed slinger can easily topple it off the supports if the Y axis acceleration gets too high. I used a base layer height of 0.2m but used variable layer height to keep the round parts detailed enough to freely rotate one it's off the heatbed. I used Bambu Lab Basic PLA on a Bambu Lab A1 mini.

Tagi