Simpler Handle Edit of Sandford Prime's PiP Butterfly Knife/Balisong
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I just edited the handle to have no serration or cutouts. Everything else is the same.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 107
- Makes
- 1
- Views
- 459
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
If you're finding this by itself, be sure to see the original first: https://www.printables.com/model/846554-butterfly-knife-print-in-place-balisong
This is just a small edit to the original. I altered the handle to remove the serration and diamond cutouts.
==== My Print Settings ====
You obviously don't have to use these settings. But, in my print, I used 100% infill, tree supports, and made sure to manually set the printer 50% speed after it got about halfway done. It's pretty heavy with 100% infill so a bed slinger can easily topple it off the supports if the Y axis acceleration gets too high. I used a base layer height of 0.2m but used variable layer height to keep the round parts detailed enough to freely rotate one it's off the heatbed. I used Bambu Lab Basic PLA on a Bambu Lab A1 mini.