1 / 2
Clip to fasten garlands to a porch handrail — zdjęcie 1
1 / 2

Clip to fasten garlands to a porch handrail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Garland clip for wooden porch handrail measuring 148,5mm x 32mm with half inch arc on top.

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
1
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Made to hold down garlands onto a wooden porch handrail or posts.

 

Version 1 is just a prototype that worked for my use.

 

Version 2 is reworked 2mm wider to fit a little looser, has 3mm fillets on all angles except the bump that is supposed to fit loosely coupled into a groove present under my porch handrail. Also 1mm thicker wall and 1mm extra room in opening. Reduced to 10mm Z-height.

 

The 3rd model is for fasteing garlands to a post measuring 73mm x 48mm (rounded up), with holes in case there's a need to use thin wire to ensure in stays.

 

Print in PETG - 100% infill, otherwise it will most likely snap.