1 / 2
Clip to fasten garlands to a porch handrail — image 1
1 / 2

Clip to fasten garlands to a porch handrail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Garland clip for wooden porch handrail measuring 148,5mm x 32mm with half inch arc on top.

Rating
0 / 5
Likes
1
Downloads
13
Makes
1
Views
55
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Made to hold down garlands onto a wooden porch handrail or posts.

 

Version 1 is just a prototype that worked for my use.

 

Version 2 is reworked 2mm wider to fit a little looser, has 3mm fillets on all angles except the bump that is supposed to fit loosely coupled into a groove present under my porch handrail. Also 1mm thicker wall and 1mm extra room in opening. Reduced to 10mm Z-height.

 

The 3rd model is for fasteing garlands to a post measuring 73mm x 48mm (rounded up), with holes in case there's a need to use thin wire to ensure in stays.

 

Print in PETG - 100% infill, otherwise it will most likely snap.