Synology DS920+ Anti-Vibration Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by similar designs, an anti-vibration stand using 4x squash ball for Synology DS920+
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This model is inspired by Synology DS 1522+ Anti Vibration Stand by reserve and Synology DS923 antivibration stand by Adam Nuclear, but made from scratch in OpenSCAD using BOSL2 library to fit DS920+ specifically. Using this stand has the added benefit of improved cooling from underneath.
It requires 4x squash ball - most people recommend the 2 yellow dots model, so I used it, and it seems to work well. Got mine on cheap from Decathlon.
The stand is split into two identical pieces in the same way as the original and requires 4x M3 7mm flat head screws with 4x hex nuts. That way it just fits 20cm print bed (to be precise: it's 207.5mm, but you can just ignore those bits, place diagonally or tweak the source code). After other tweaks, I realized I didn't need to go with the split, as the merged object fits my 225x225mm bed. However, someone may want to use the source code to print for a much larger NAS model.
Printed on Creality K1C with Hyper PLA-CF using 0.16mm layers and 10% adaptive cubic in-fill (default 2 wall loops). Supports are required, normal (not tree) work fine. The cutouts for nuts cam out quite tight, but using a longer screw and a bit of force, you can pull the hex into place. Same for balls - you need to push them hard; sphere cutout probably needs to be placed higher in the model, but again - works well after a few minutes of positioning.