RunCam Thumb 2 Helmet Mount Nolan N80 8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helmet mount for Runcam Thumb 2 onto Nolan N80 8 helmet
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
My first and really simple model, designed with Tinkercad.
Helmet mount to equip a Runcam Thumb 2 onto the front part of a Nolan N80-8 helmet.
Air-intake on the front of the helmet is not obstructed.
Its lightweight and strong enough to hold the camera safely with the included TPU mount. It should break easily on a crash to ensure the helmet is not affected (unlike other big, chuky and heavy mounts). The included M3 screw and nut from the camera can be used.
Should be clued to the helmet with a flexible and strong glue like: Sugru by Tesa, or Kafuter K-586 (silicone based industry glue). I used Kafuter K-586, because it is cheaper, waterproof, stays flexible and is easy to remove. Available on AliExpress or other shops.
Printed with 100% infill with supports for the front part