Adventurer 5m PRO squash ball feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squash ball feet for FlashForge Adventurer 5m PRO
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 985
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Probably the simplest squash ball feet for your Adventurer 5m PRO. The main idea behind it was not to upgrade the print quality, but to reduce the vibrations transferred from the printer to the outside world =)
I've printed mine upside down in ABS with 0,62mm line width, 4 walls and 50% infill simply because. Other print settings and materials may be applied to your liking. Supports may also be needed, though I've printed mine without them.
Once printed, unscrew your stock feet, use the same screws to attach the new ones, insert the squash balls (2 yellow dots recommended for best performance) and make sure to redo vibration calibrations from your printer's menu.
This model was created completely from scratch, although it was 100% inspired by the general concept and hundreds of similar models. As such - please feel free to use the model in any way you like.
Attribution isn't necessary, but always welcome =)