1 / 1
Fan-Made Suika Game — zdjęcie 1

Fan-Made Suika Game

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Try to fit one of every fruit in the container! Simple layer based color changes with guide below!

Ocena
0 / 5
Polubienia
5
Pobrania
15
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

All models are pre-oriented for ease of printing. Details on layer changes are below. 

I have a ton of custom settings to get my junk printer to work close to correctly, so I unfortunately don't have a way to share tested print files with the layer changes already baked in. I tried. :'( (If anyone wants to share print files with me, I'd love to post them. :)

Print Details:

All models were printed at .32 layer height at 60mm/s with 15% infill, and are +/-5mm for ease of sliding into the display. Nozzle was a common .4mm.

For single extruder printers (like mine), simple layer based pauses make the color changes easy. Below will be the layers I did my changes at, which I would expect to be the same on your machine, but I'd recommend double checking using your slicer's preview function. :) (If you have an AMS or the like, well, you probably don't need my advice on this part.)

WatermelonStart - White8 - Light Green10 - Dark Green12 - Black
MelonStart - White5 - Light Green10 - Yellow12 - Dark Green
PineappleStart - Dark Green3 - Light Green5 - White8 - Yellow12 - Gold
PeachStart - White8 - Pink12 - Red
PearStart - White8 - Yellow12 - Gold
AppleStart - White8 - Red12 - Brown
PersimmonStart - Green8 - White10 - Orange12 - Copper
DekoponStart - White8 - Yellow12 - Gold
GrapesStart - Light Green5 - White10 - Purple12 - Black
StrawberryStart - Light Green10 - Red12 - White14 - Black
Cherry  Th

For the glass, I used a cheap sheet of 1mm thick clear acrylic from Hobby Lobby - cut to 150x100mm. You'll need 2 pieces cut to these dimensions. 

All pieces should go together very easily with the included alignment pins, and some good ol super glue. You'll need 4 pins, 2 side rails, and 1 of everything else. I personally printed 4 of each fruit to give my mom for Christmas. :)

**No guarantees that it's possible for all of the fruits to fit in the case. I tried for a while, then my wife who's a bonafide Tetris master tried too. First person to post a photo with a complete set of fruit in the case gets a mention in the description here! :D

As always, any suggestions are welcome! And I'd love to see any Makes! :D

Enjoy!

 

****If a rep from Suika sees this, my mom adores your game and I designed this as a Christmas present for her. If you have any issues with this being published on here, just let me know and I'll take it down immediately. <3 This design is not monetized in any way. You guys made a great game with a fresh take on the Tetris/Bejeweled genre and you deserve all of the love and fans that you have!

Tagi