P
Printables3DWP
Orange 3D Scan
I made this test scan some time ago with a RangeVision Standard Plus 3D scanner. I added the original and a reduced version. https://www.3dwp.nl
- Pobrania
- 1067
- Polubienia
- 52
- Ocena
- 4,92
Wyniki wyszukiwania: orange
Liczymy pasujące modele…
P
PrintablesInternalError33
Case for an Orange Pi 3 LTS
This case is designed for an Orange Pi 3 LTS. Integrated into the design is a 5V 4010 fan for cooling. Printing: I designed the case with a .02 layer height in mind, and printed the parts in PETG with no supports. If your printer…
- Pobrania
- 990
- Polubienia
- 93
- Ocena
- 4,8
P
PrintablesRaquelJuaPer
Pendientes de limón o de naranja / Lemon and orange earrings
Preparado para imprimir con boquilla de 0,4 a una altura de capa de 0,2. Diseñados para aplicarle dos cambios de color. Las imágenes pueden tener derechos de autor y/o propiedad intelectual.
- Pobrania
- 113
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMarcus24
Handheld Game Console (Orange Pi Zero Plus 2)
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 This thing is still a Work in Progress! 3D Model View Assembly This is Handheld Game Console which is powered by Orange Pi Zero Plus 2 (H3 version).…
- Pobrania
- 105
- Polubienia
- 31
- Ocena
- 0
P
PrintablesQuackbangshit
CZ Shadow 2 Orange Bushing Tool
Bushing Tool for the CZ Shadow 2 Orange.
- Pobrania
- 95
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBecker Thorne
A Clockwork Orange Neighborhood Watch SIgn
A Clockwork Orange Neighborhood Watch Sign Show them how you patrol your neighborhood. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
- Pobrania
- 71
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAndreas
Orange Perplex
Orange Perplex Another participant in the 2019 Design Competition was Orange Perplex. There are five three-slices pieces to combine in an orange. A bit harder than Donut Perplex Junior, but doable for puzzlers with a healthy appetite. The…
- Pobrania
- 67
- Polubienia
- 5
- Ocena
- 5
P
PrintablesMax Models
Black With Orange Sharp Knife V.1.1
Sharp Knife Easy to print now !!
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 4
P
Printablescreichert
LabStack Orange Pi Zero 3 module
This is a fairly polished “draft” module for LabStack rack mounts. For mounting the Orange Pi onto the module, I was generous with the mount holes so you can use whatever hardware or fasteners you have laying around. I used the screws and…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBoomstick Mods
Tacticool Spring Thunder - Orange Tip
Designed to be attached to the tacticool spring thunder body designed by Lyza ( HERE )
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCAR
Pitzer College / Orange Slice Hanging Party Decoration
This is a custom designed party decoration for a student attending Pitzer College in the Fall of 2023. This design uses the thin layer over-print to embed color into the flat surface of a print. It also uses a layer-based filament change…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAlin Stanciu
A Clockwork Orange Bookmark
A Clockwork Orange Bookmark. Have been printing and designing models for a couple of years and finally took the plunge and uploaded my first model to Printables, hope ya'll like it. Can be printed without AMS by Switching filaments as…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesgedeyenite
Skillcraft Scissors Gridfinity Bin (Verticle) Orange & Gray Handle - No Magnets
I have a specific scissor. I could not find a fitted bin for it so I made this one from Seishin's OnShape Gridfinity Generator as a starting point. No magnets or screw holes. Link to OnShape if you want to copy and mod. Start from scratch…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGkouto
Orange pi 3b octoprint box
this is a box for orange pi 3b to install on 3030 extrusion. this is curently installed on my caribou mk3s. and for a 5 inch touchscreen to install octodash
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLuis Eduardo MR
CoralBoard Modular Enclosure – Black & Orange
CoralBoard Modular Enclosure This is a custom-designed enclosure for the Synaptics CoralBoard, featuring a black-and-orange color scheme and a modular construction. The design includes a ventilated back panel, side access openings, and a…
- Pobrania
- 3
- Polubienia
- 9
- Ocena
- 0
P
Printables
2-1-0.5 Orange Building Block
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they can learn skills and test out theories…
P
Printables
Kobra 2 Neo KlipperScreen OrangePi Zero 2W
Screen Housing Model for Anycubic Kobra 2 Neo 3D Printer with Integrated OrangePi Zero 2W Board
P
Printables
Cube Orange Power Supply Mount + Battery holder
A mount for the cube orange power supply + can be used as a backend for a better to be held against. [Includes a slot to mount a sponge for the battery to rest against]
P
Printables
F330 Vibration Isolation Mount Top Plate for Cube Orange
Vibration Isolation Model: https://www.thingiverse.com/thing:3794194 (45x45mm version) Additional Hardware: - M3 Heat Set Insert The top plate has two versions. One for a 4mm heat set insert and another for a 6mm heat set insert. Each to…
P
Printables
Celestron C8 (Orange Pebble Tube) EAF Bracket REVISED 8-April-2026
EAF Bracket, Bearing Retainer/Spacer and Collar for the older Celestron C8 with Orange Pebble tube. I bought a similar design 5 years ago but, it never worked properly. I made some major changes in rigidity, functionality as well as this…
P
Printables
Articulated orange tea light candle holder
I added articulated arms and legs to the orange and cut out a hole for the candle. I wasn't able to prepare a model with a cut-out candle cylinder, but you can do it yourself. Most modern slicers allow you to use primitive objects to cut…
P
Printables
OrangePi 4 Pro Case
🇬🇧 English The differences include adjusted hole spacing and modified mounting points to properly fit the Orange Pi 4 Pro. I also created an alternative top cover that allows installing two 3010 fans. This version has an increased height…
P
Printables
Stade Orange Vélodrome - Marseille
Le stade Orange Vélodrome de Marseille - OM Ce modèle est gratuit pour un usage personnel. Si vous aimez mon travail et souhaitez me soutenir, vous pouvez m'offrir un café via le lien sur mon profil ou directement avec PayPal :…
P
Printables
The Orange Cans
To my ears, this sounds the same as the Valve Index Drivers. They sound pretty dang good and work on desktops, laptops, smartphones, the SteamDeck, and Android handhelds. Bill of Materials: x2 Tectonic TEBM35C10-4 BMR 2" Full Range…
P
Printables
ORANGE FREEZE FORM
ARE YOU BORED? ARE YOU UNEMPLOYED? DO YOU LIVE WITH YOUR PARENTS? FREEZE AN ORANGE!! With this box form you can freeze an orange inside an ice cube. it is a great way to surprize your friends, and if youre lonely you can talk to it! BUT…
P
Printables
Orange Pi Zero 2W Case
I wanted a simple Design for my Orange PI Zero 2W that included space for a USB Hub and an Mini to Full size HDMI adapter. (it is built around parts i had on Hand) (Pictures are from my first draft. I needed to redesign the HDMI port)…
P
Printables
Modded Lid for "Case for orange pi zero 2w with extension"
The original model allowed the antenna to flop out and I wanted the antenna to stay internally, so I modified the design to fully encapsulate it. The added fins are to make it able to take more force since it needs to be printed…
P
Printables
Orange PI 6+ Simple Case
Orange PI 6+ Case A simple case for a Orange PI 6+ . Two printed parts, top and bottom Printing: Case is designed with PETG in mind with organic supports. Parts List: Case Top and Bottom (Printed) 8 M3x6 screws (hold top and board to…
P
Printables
Simple case for Orange Pi 4a
I couldn't find a simple case for the Orange Pi 4a online that would properly position the connectors and buttons, or accommodate a cooling fan and heatsinks. So, I present to you my very simple case, which meets all my requirements.…
P
Printables
Orange Pi Zero 2w extended lid with 40mm fan
just added a 40mm fan attachment node at the top, had to be put at an angle to fit but it works, dropped cpu temps from 55c to 28c with small heat sinks.
P
Printables
Expandable Fidget Orange – Articulated Orange Stress Toy
This expandable fidget orange is inspired by the shape of a fresh orange and features a segmented, articulated design that allows it to smoothly expand and contract. The rounded form and rhythmic movement create a calming and satisfying…
P
Printables
Handheld Citrus Juicer Reamer, Lemon Lime Orange, Ergonomic - 3D Printable STL File
A unique 3D printable creation — this Handheld Citrus Juicer Reamer, Lemon Lime Orange, Ergonomic Handle, Juice Strainer Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
P
Printables
FILAMENT ORANGE GIGA
In order to improve the support for my Elegooo, I created this piece. You will need a 30mm square iron tube, two M4 scr
P
Printables
Orange Bird Magnetic Mickey Ear
Disney World Orange Bird Magnetic Mickey Mouse Ear Category: Other
P
Printables
William III of Orange (Willem Hendrik van Oranje) – Bust
William III of Orange (Willem Hendrik van Oranje) – Buste Ce buste représente William III of Orange , né Willem Hendrik van Oranje (1650–1702), prince d’Orange et figure majeure de l’histoire européenne du XVIIᵉ siècle. Il fut stathouder…
P
Printables
Boitier Orange pi Zéro
Insatisfait des boitiers proposer , j'ai refait un boitier avec plus de circulation d'air et le fond peut être fixer facilement . Matérial : Pla Remplissage 15% à 20 % hauteur de la couche 0.2 et 3 parois bonne impression
P
Printables
OrangePi 5 case for lowprofile cooler
Orange Pi 5 case for low profile cooler. has magnets mounted with countersunk screws and access door for ssd.
P
Printables
OrangePi RV acrylic box side panel
If you buy acrylic box for OrangePi RV and instead you have to buy one for OrangePi 5 Pro and the side panel does not fit you can use this instead. Now it fits nicely. Print whatever setting you feel comfortable, whatever material you…
P
Printables
Stylish frame for Orange wifi repeater (for 10x13cm photos)
Stylish frame for Orange wifi repeater designed to hold 10x13cm photos. Print: 1x StylizedFrame on the flat side (no support required) 1x BasePlate on the flat side (no support required) 4x Dowel (use brims) Place the photo behind the…
P
Printables
Orange Pi 4 Pro NAS
Home NAS based on Orange Pi 4 Pro + ASM1166 Parts: Orange Pi 4 Pro (Allwinner A733) Micro SD Card 16+ GB Note: Bootloader/kernel/initrd can be installed to the internal 16MB SPI Flash ASM1166 (m.2) PCIe to 6xSATA-III bridge. (PCIe 3.0 x2,…
P
Printables
Modular insert for Orange Pi 4 Pro
The connector and screw layout of Orange Pi 4 pro is the same as Raspberry 5, with the difference of the nvme drive at the bottom of the board, having a screw base standing out preventing a pi5 case to be used. This insert places the…
P
Printables
OrangePi Zero 3 Case 4010 fan
Remix de la caja OrangePi Zero 3 para ventilador de 40 mm. OrangePi Zero 3 case remix for 40mm fan.
P
Printables
Orange Pi 3 LTS Bracket & 4010 Fan Mount
Orange Pi 3 LTS Bracket & 4010 Fan Mount (Personal Use) The fan and bracket are secured with M3 nuts. The lower section does not include a protective guard. For personal archival.
P
Printables
Orange Pi 3b v2.1 case
I couldn’t find a case online for the updated Orange Pi 3b to version 2.1 and decided to correct this situation. The case is very tight, but fits: a cooler (30x30x10), a WiFi antenna and a CR2032 battery. I even managed to attach small…
P
Printables
Elegoo Orangestorm Giga funny Sign
The ultimate flex for every 3D printing enthusiast! This sign proudly declares that your printer is bigger than theirs... even if you're currently printing it on a standard 220mm bed. It’s designed to be a tongue-in-cheek addition to your…
P
Printables
OrangePi Zero 3 Case
Added V2 with improved bottom and top (easier sd card insertion, thicker bottom) Bottom Standard VESA 100/75mm VESA 75mm Top Closed HexCut Closed with ring Closed rounded Bottom and top parts are interchangeable (but not between…
P
Printables
Orange Pi 3 LTS case
Removed the mounting holes on the outside to make it a practical, portable case.
P
Printables
Tacticool Spring Thunder - Orange Tip
Designed to be attached to the tacticool spring thunder body designed by Lyza ( HERE )
P
Printables
Orange Pi Zero 2W Case w GPIO&FPC exposed
Use 4xM3*4 heat inserts and 4xM3*8 counter sink screws for assemble. Freecad design file included incase you need to make your own change. Updated: V2 version extended the edge by 1.5 mm so that TF card can be protected by the case.You…
P
Printables
Full size orange juicer
Citrus squeezer for full size oranges. The tamper lets you squeeze the remains easily. For use with mason jars with outer diameter (excluding threads) of 77 mm and six threads. Maybe print the top part in draft mode first to see if it…
P
Printables
Whiskers for LEGO 21349 Tuxedo Cat / 21376 Orange Cat | The Purr-fect Accessory!
The Purr-fect Accessory! Your LEGO cat is adorable, but something's missing... whiskers! Fear not, we have the purr-fect solution! Give your LEGO cat the whiskers it deserves! These specially designed whiskers will add a touch of realism…
P
Printables
OrangePI 5 Zinc-V Case
This is an OrangePI-5 case meant to take advantage of the Redux Robotics ZINC-V regulator . Assembly instructions here. It is designed to use a 40 or 50mm, 10mm thickness fan and fan filter. Assembly requires the following hardware: 2x…
P
Printables
Orange PI PC case
The simple case for OrangePi PC is fully printable, does not require additional elements for assembly.
P
Printables
Lego Wreath Orange Slice
Please enjoy my Lego Orange Slice compatible with the Lego Wreath by MagnumDanger.
P
Printables
Longer Orange 30 lid improvements
Parts to improve the lid of the Orange 30. Should snap in place but use glue (copious amounts recommended) if you plan to remove the rubberbands holding this travesty of a lid together. Makes the lid look a bit nicer too. I realized that…
P
Printables
Orange Pi Zero 3 Case
This is a remix of the Orange Pi Zero 3 case with added features. Printed in PETG with 0.2mm detail with 18% infill. No supports necessary, just some cleanup from PETG stringing and screw hole overhangs. The two parts sandwich the SBC…
P
Printables
Fan adapter for Orange Pi Zero 3 Case
Orange Pi was running a litlle hot so why not try a fan, it got me from 47ºC to 37ºC Max . 4x - 40mm M3 Socket Head Cap Screws instead of the 35mm. Winsinn 4010 Fan or similar. I cut the holes with some negative part cubes on the slicer…
P
Printables
Orange pi Zero2W case
A case to fit my Orange pi into, my idea was to mount the Orange pi and the expansion board onto the base and remove the cover when I am using it, I figured there would be less heat build up when not enclosed and the cover would protect…
P
Printables
TIRELIRE EN FORME D'EMBALLAGE DE JUS D'ORANGE EN CARTON
Ma fille voulait une tirelire en forme de boîte de jus d'orange en carton, j'ai trouvé l'idée sympa, alors un peu de modélisation et voilà le résultat. Vous pouvez l'imprimer en 2 couleurs ou en 1 couleur, c'est vous qui voyez, le bouchon…
P
Printables
Simple Orange Muzzle Tip Cover for Nerf Hobby Barrels (16mm OD metal barrels)
This is a simple muzzle cover for Nerf hobby barrels (16mmOD metal barrels) which adds an orange tip, and prevents core-sampling (injuries from being hit with the exposed end of a metal barrel). This muzzle does not affect the accuracy or…
P
Printables
2-1-0.5 Orange Building Block
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they can learn skills and test out theories…
P
Printables
Wearable Orange Pi Zero Case
Based on a great design by https://www.thingiverse.com/xoan and https://www.thingiverse.com/farrukh . Changes include: Snap in (no more screws required!) Vertical and horizontal antenna option (near the ethernet socket) The bottom part…
P
Printables
supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack
supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack made this bc i couldn't find anything i liked online. I'm not super experienced so very uncertain about its strength. Installing is very simple all you need is a few zip ties…
P
Printables
Orange Pi 5 Case
This is my spin on Orange Pi 5 Case that is designed with 2280 SSD in mind and a 5015 radial fan for cooling. The piece of painters tape is used as a air duct to increase airflow above SOC. To mount fan I used countersunk m3x20 and nuts…
P
Printables
Orange Pi 5 Plus Case
Made remix for a fellow redditor. Not tested, but ready to do some adjustment if needed. Feet adapted for 13mm dia rubber disks, you need to mirror them 2/4 parts
P
Printables
Sovol sv06 plus case for the Orange Pi Zero 2W with expansion board
Sovol SV06 Plus Orange Pi Zero 2W Case This is a custom-designed case for the Orange Pi Zero 2W and its expansion board for the Sovol SV06 Plus 3D printer. This case provides ventilation, protection, and easy access to most essential…
P
Printables
Ghost of tabor purple, orange, green card, and red
models of the area cards from the vr game Ghost of Tabor dimensions of all cards x- 91.44mm y- 55.96mm z- 2.67mm NEW RED
P
Printables
Ender 3 Rear Case for Orange Pi Zero 3
A case for the Orange Pi Zero 3 for Teaching Tech's All-In-One rear case
P
Printables
Runcam 5 Orange GoPro Mount - FPV - ND Filter
A protective mount for the Runcam 5 orange that fits a roughly 20 by 20 ND Filter. The mount does impede vision a little bit on the edges. Print in TPU
P
Printables
Orange Pi Zero 2w Voron Mount
I needed a mount for my Orange Pi Zero 2w (which is a completely different form factor than the Orange Pi Zero 2) to go into my Voron 0.2. The form factor matches the Raspberry Pi Zero (and Raspberry Pi Zero 2), but has an external…
P
Printables
Easy multicolor Orange Barrel
Construction Zone Orange Barrel. Easy mulicolor with AMS or pause at layer method.
P
Printables
Kobra 2 Neo KlipperScreen OrangePi Zero 2W
Screen Housing Model for Anycubic Kobra 2 Neo 3D Printer with Integrated OrangePi Zero 2W Board
P
Printables
OrangePi 3 LTS case
I use my OrangePi 3 LTS with this ( aliexpress ) radiator set, so I designed a simple case that fits the orangepi with a radiator and a cooler. PS: I don't use IR remotes, so the IR port is not routed to the outside.
P
Printables
Orangepi 3B case (There are multiple versions)
This model consists of three parts: upper cover, lower cover, heat sink bracket (optional). For each type of thing, you only need to download one of them.If you need to customize something yourself, I also provide STEP files, you can…
P
Printables
Citrus-Peeler / Orange Peeler / Zitrus-Schäler PLR
(DE) Der Orange-Peeler PLR ist ein innovatives Küchenwerkzeug, das das Schälen von Orangen und anderen Zitrusfrüchten zum Kinderspiel macht. Mit seinem ergonomischen Design und einer scharfen Klinge ermöglicht er ein müheloses Entfernen…
P
Printables
Dr Strange Sling Ring orange peeler
Wanted an orange peeler given the amount of oranges I bought for the festive season. Thought I'd print out a more unusual one for fun :) Had the idea of altering the sling ring from Dr Strange. As I had already downloaded one awhile a go…
P
Printables
Orange Pi 5 Plus Case v3
There are a few files, Please choose the correct one for your use case. In Prusaslicer, Right Click → Split to separate into lid/body. Updated Version of my other Orange Pi Case, Extruded out the sides to wrap around and better support…
P
Printables
Mr. Orange miniature model multi color Print !!!!!!!
print with tree supports and it takes about an hour. Mr. orange a quick fun look looking model could be printed with ams or multicolor system. picture above for reference.
P
Printables
Elegoo OrangeStorm Giga Bowden
Conversion of the Elegoo OrangeStorm Giga to Bowden with fixed filament sensor Umbau des Elegoo OrangeStorm Giga auf Bowden mit festen Filamentsensor
P
Printables
Capybara with spinning oranges
A playful Capybara with the spinning oranges! To print objects faster, I only used two colors for the AMS, the body and the oranges. I used the markers to draw the eyes and blush. You can apply a little force to twist the top orange, and…