Orange peeler / Orangenschäler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little helper to cut the shell of citrus fruits into several pieces and to remove it with the flat end.
- Ocena
- 4,947 / 5
- Polubienia
- 196
- Pobrania
- 2372
- Wydruki
- 38
- Wyświetlenia
- 5688
- Oceny
- 38
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Object Description:
Orange peeler.
Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces.
If you need a version with a lower cutting depth or any other modification, don't hesitate to contact me.
Update from 2024-02-02:
Version with included mouse ears added which can be easily snipped off.
Update from 2022-03-28:
Print settings regarding brim updated.
Print settings:
Material: PLA
Layer height: 0,1mm
Infill: 20%
Perimeters: 3, 4 at the cutting head (already included in the 3mf-file)
Brim: not required with a good first layer adhesion, otherwise due to the thin end recommended. As an alternative, you can use the version with included mouse ears.
Support: no
All top surfaces ironed