Orange peeler / Orangenschäler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little helper to cut the shell of citrus fruits into several pieces and to remove it with the flat end.
- Rating
- 4.947 / 5
- Likes
- 196
- Downloads
- 2,372
- Makes
- 38
- Views
- 5,688
- Reviews
- 38
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Object Description:
Orange peeler.
Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces.
If you need a version with a lower cutting depth or any other modification, don't hesitate to contact me.
Update from 2024-02-02:
Version with included mouse ears added which can be easily snipped off.
Update from 2022-03-28:
Print settings regarding brim updated.
Print settings:
Material: PLA
Layer height: 0,1mm
Infill: 20%
Perimeters: 3, 4 at the cutting head (already included in the 3mf-file)
Brim: not required with a good first layer adhesion, otherwise due to the thin end recommended. As an alternative, you can use the version with included mouse ears.
Support: no
All top surfaces ironed