Counting matching models…
Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…
Object Description: Orange peeler. Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces. If you need a version with a lower cutting depth or any other modification, don't…
Very easy to peel Oranges with this orange peeler. Print with layer height of less or equal to 0.15 mm for sharpest peeling edge. Video: https://youtube.com/shorts/n5TloG01Yb8
Inspired by an orange peeler that we used to have years ago. Printing PETG
I was thinking to myself the other day… I said “Self, you know what we need?” Self said “No, what do we need?” I responded “A way to peel cables easily and safely that doesn't involve putting pants on and going out in the cold to buy a…
The perfect tool in the perfect size. Small yet mighty. Helps you do the task that we hate.
This Gadget Makes Peeling an Orange or a Pomelo a Breeze! + No knife needed + Easy take-away + Quick print + More safe to use by children (no knife) + Comes in two versions: For thick and thin fruit-skins Printing Recommendations: 0.2 mm…
Modeled an orange peeler from a purchased one. Works well and prints easily
Wanted an orange peeler given the amount of oranges I bought for the festive season. Thought I'd print out a more unusual one for fun :) Had the idea of altering the sling ring from Dr Strange. As I had already downloaded one awhile a go…
Так як інші моделі механічних очищувачів споживаються або незручні, або відбирають задоволення від процесу, а зберегти зуби і пальці від мозолів потрібно (бо телефон уже не розблокується😄), щоб створити отаку лузкалку для очищення…
The bolt to be inserted into the roller should be an M3 cap bolt of 20 mm or less. If the shaft does not fit, use a slicer to make it thinner.
Godskin Peeler from Elden Ring
Orange peeler for oranges Made it on onshape
Supports Are Needed . You can resize the model by remix It / or on Your Slicer . Enjoy & Share your prints with me!
https://www.target.com/p/oxo-swivel-peeler/-/A-13567836?ref=tgt_adv_xsp&AFID=google&fndsrc=tmnv&DFA=71700000106731582&CP
Crawfish peeler as seen on Amazon. Two different hinges are included. If the 2mm hinge is too tight, print the 3mm hinge instead. To assemble, add a dab of glue to the dovetail slots and slide the hinge into place. The model functions and…
I put this as a derivative even though I made it from scratch, I made it because I liked the Ultimaker idea but I needed for much wider labels (some of my labels are up to 80mm wide) and I felt it did not need to be as deep and such as…
I had print in PETG. For the blade 100% infill. For the body 50% infill.
This is a replacement handle for our broken vegetable peeler (Tupperware Universalschäler / Universal peeler) 10/2016: Since my first print (PLA!) finally failed after one year of usage in our kitchen, i have created an updated version 2,…
Print with flexible material (like NinjaFlex, 85A/30D).
Sunflower Seed Peeler. Included SLDPRT files. Print Settings Printer Brand: Prusa Printer: Prusa Clone **Rafts:** No Supports: No **Resolution:** 100 Infill: 70 **Filament:** ESUN PLA Category: Hand Tools
During long and frosty nights, this little piece of plastic will be a lifesaver in a fight against a thick peel of orange. It will help you quickly with peeling those small fruits, so that you will no longer get your hands dirty. Grab the…
(DE) Der Orange-Peeler PLR ist ein innovatives Küchenwerkzeug, das das Schälen von Orangen und anderen Zitrusfrüchten zum Kinderspiel macht. Mit seinem ergonomischen Design und einer scharfen Klinge ermöglicht er ein müheloses Entfernen…
Simple way to cleanly peel an orange without getting gunk under your fingernail.
Protective cover for an OXO Potato Peeler. An OXO peeler has a very sharp blade which is normally protected by a flimsy plastic clip that soon gets lost. I have made a cover that fits over the end of the peeler to fully protect the blade…
Remix du model de SCBR Impression en PETG 50% support: plateau uniquement
I recommend to print: in ABS or ASA to be sure that it is dishwasher proof with 4 perimeters. with supports touching buildplate fits 58mm wide blades It fits e.g. the blue peeler of this set.
Plantez la dent, tournez le fruit.
OXO makes a fantastic peeler. It is very sharp - dangerously sharp even. The only thing I dislike is the flimsy blade shield they include with it. I designed a blade shield/cover that protects the blade and more importantly my fingers…
Use case Peeling an orange with a simple kitchen knife can damage the flesh of the orange… and the flesh of your fingers! This part aims to protect both. Simply slide the shaft over the blade of your little kitchen knife, adjust how much…
Tisknuto na výšku, ASA, organické podpěry, jinak default. 0.4 tryska, 0.2 vrstva, 15% výplň. Váží to pár gramů. Až se zlomí vytisknu jinou.
A quick simple orange peeler design i made to test my new printer - works well on hard to peel oranges (you slit the peel with it) printed with pla in .2 layer height 1mm shell 20% infill - propably could be variated. Maybe the cutting…
Ersatz für einen Gemüseschäler (AMC) - mein erstes eigenes gedrucktes Modell (2018)
I recommend to print: in ABS or ASA to be sure that it is dishwasher proof with 4 perimeters. with supports touching buildplate fits 50mm wide blades It fits e.g. the red and black peelers of this set.
Einfacher Obst- und Gemüseschäler für Kinderküche (stumpf) Es werden 2x M2x6mm Schräubchen benötigt Habe noch eine zweite Klinge mit angefügt als Variante ohne Schräubchen, wurde von mir aber nicht getestet Simple fruit and vegetable…
My Victorinox peeler melted, but the blade was still good, so I made a new handle, with inspiration from the IKEA STÄM peeler. About the Gcode uploaded: PETG; Preset 0.15 Prusa Quality Mini+; Aligned seams; 3 perimeters. No supports.…
While you can find injection-molded budget versions on AliExpress for around $2 a pair, this 3D-printed alternative is not only more cost-effective but also significantly more robust and durable . 🛠 Print Settings Supports: None (Designed…
My 15-year old Boerner (Börner) peeler broke, so I created a similar handle to work with the blade, which is still good after all this time. Note that I did not include any of the other features of the original peeler, e.g. coring, etc.…
Some teeth of the large bevel gear had broken in our hand cranked potato peeler so I had to make this. Our potato peeler happened to be of a brand Valentini, but other brands seem to exist too. I printed it in Prusament PLA with 0.2 layer…
This was created to peel seeds with the use of a geared motor to be able to make consuming sunflower seeds more fun! I Suggest printing in PLA with a 0.4mm nozzle and 0.2mm layer heights. p.s a battery holder is not included as the one i…
Orange Peeler Easily cut and peel oranges with this Orange Peeler. Size: ~160 x 10 x 11mm Changelog: 09-08-2026 - Reduced size of cutting head. 09-07-2026 - Initial release.
Tak zvaná škrabka na banány (zdroj.google překladač). The so-called banana peeler (source.google translator).
Pawpaw peeling Machine Please leave a like if you enjoy my design. Also feel free to check out my other uploads.
This model protects the sharp edges on an OXO steel vegetable/potato peeler. It also may prevent getting cut on the sharp edges. Flex/TPU is used so the sheath can easily be taken on and off of the peeler. The parametric Fusion 360 model…
I am getting into Gridfinity and custom bins, and made this for my kitchen drawer. It easily holds 3 peelers, maybe 4. Also added is the silhouette if you need that to do your own thing. I scanned the peeler on a flatbed scanner, moved…
basic replacement knob for apple peeler uses m4 bolt that treads into the end
I couldn't find any existing models so made this dispenser to peel and hold Noritsu / Fuji style twin check stickers. I actually use these to keep track of my film from shooting, through development to archive. The roll sits on the holder…
I have built a 3rd wheel which goes from 3mm down to 0.5mm. This allows you to cut thinner wires along the length. Category: Tools
Diese Wandhalterung habe ich für meine 3 Sparschäler von "Tupperware" erstellt, damit sie jetzt immer gleich griffbereit zur Hand sind entwickelt mit Tinkercad I have created this wall mount for my 3 peeler from "Tupperware" so that they…
Pelador de patatas convencional, se imprime a 0,2 con petg para mayor resistencia, con 6 paredes de perímetro. El blanco es el viejo el negro el nuevo La cuchilla he utilizado la vieja, pues lo que estaba roto era el soporte. Conventional…
prints in under 10 min. no support needed. simple construction. share your prints if you make one!
Original thing was created by Thingiverse user Joesevens
A gridfinity 1x3 bin with a divider to have 2 slots. Based on Gridfinity Rebuilt für two peelers
Peeler for Standard Blades This 3D printable peeler is designed to accommodate standard peeler blades, offering a comfortable and ergonomic grip for effortless peeling. Its sleek and minimalist design ensures easy cleaning and efficient…
This is a replacement for the Farberware vegetable peeler part that holds the blade. The old blade is use in the replacement part and a pause in the g-code allows the blade to be inserted into the part as it is being printed. The…
Print details: Material: PLA,PETG Layer height: 0.15mm or 0.2mm Supports: YES Infill: 15%
Slips onto the handle, and protects the peeler blade. I recommend printing it in PETG, but other materials should work.
My old school potato peeler handle cracked a few months ago, when it happened I kept it thinking someday I would try to make a replacement. This wasn't because this is the best potato peeler ever made but because I wanted to see if I…
Remix from: https://cults3d.com/en/3d-model/home/sunflower-seed-peeler I have Created a Tray for a sunflower seed peeler found on cults3d. There are three files linked one is a tray with no hole and the other 2 is a tray with hole and a…
Holder for Tupperware vegetable peeler. You can use it for both versions, 0 degree and 90 degree peeler. There is some space at the mounting areas for double sided tape to mount the holder Print Settings Material : PLA Nozzle Size : 0.4mm…
Grab this and use the little cone to slice open your orange's peel!
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
Can be used on many knife models. Printed whit PETG.
Original collet didn't last long. But no worries, here is a new and improved variant. Print instructions: Preferably with a wide brim so it stays in place
Simple cover for Rex Peeler, designed in Tinkercad, https://www.tinkercad.com/things/2q0pGBs3DK2-amazing-esboo/edit?sharecode=kC1bOCjhmT2MYT5nvh6c1wAGmQgqKWF83MUMZHpNoAE
This model protects the sharp edges on a classical steel vegetable/potato peeler. It also may prevent getting cut on the sharp edges. Flex/TPU is used so the sheath can easily be taken on and off of the peeler. The parametric Fusion 360…
This is a 2-piece handle for the Linden Sweden Jonas Vegetable Peeler available at amazon.com- https://www.amazon.com/gp/product/B00176JEY4. The handle prints two identical parts into which small rectangular magnets are placed during a…
cover for peeler - for traveling
It is a box to hold the replacement blade for a peeler from Westmark. I printed it in PLA+ with 0.2mm layer height and tree supports for the blade holding part. The lid is support-free. Since the clearance between the parts is only 0.1mm,…
This paper "peeler" and hex bushing are replacement parts for the Aurora AS1712X shredder. The "peeler" acts as a spacer between the cutting wheels and helps peel the paper away from the cutter axle/post as the paper is being shredded.…
Peel your "Ptasie Mleczko"!
Is a 2 blade storage version of the Westmark peeler Box
A replacement cover for a cheap potato peeler, after the original one was lost.
Náhradní rukojeť na původní nerezové škrabky Mechanika Praha. Patrně budou použitelné i na jiné škrabky. Tisknuto 100% výplň PLA+ a spokojenost, zcela funkční. Kovový list je do rukojeti zafixován (zalit) vteřinovým lepidlem, cca 5-6…
A bit of a bodge, but it works. Would suggest printing in something like ASA, the PLA one I printed lasted about 6 months of racing, which isn't bad considering. I've just printed a handful of them to replace as they break.
One-piece print. Flat edge for scoring, hook for peeling. The tip is blunt by design — file it to a point after printing. Print info: I usually print things like this at 100% infill Supports needed (for the hook tip) Prints flat
good for peeling any orange like food
I removed the cooling tower that was designed into this part. I am printing it on an SLA printer so I do not need it. Category: Hand Tools
Refer to https://loxerlogic.com/inclusive-tools-week-2/
Printed on a Sovol SV08 in OrcaSlicer. The wedge has a relief for a piece of double sided tape, and mounts flush against the wall. Assembly Print both parts. Test-fit the wedge into the holder before you stick anything to the wall — it…
model in fusion 360 printed at 300 speed PLA no support needed
This attachment is designed for the Snow Peeler device and allows you to push on the pole comfortably without tearing your gloves. I recommend printing it with TPU 95A or 98A filament, as these materials remain durable in cold weather…
Original case of blade cracked so I've created new plastic case for the ceramic blade. Original plastic case is 52 mm wide. Printed part is not suitable for food !!! The part is small so you can print it in ABS or PC. Cut plastic case of…
2x4x5 Gridfinity bin for the small potato peelers I own.
This is my remixed model of Replacement Peeler for 50mm blades
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
Remix of redcoat509's peeler that had problems when printed on Bambu P1S. Printed in Petg with 0.12mm high quality. This version adds some fillets to smooth edges and also sharpens the cutting triangle
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
I couldn't find any existing models so made this dispenser to peel and hold Noritsu / Fuji style twin check stickers. I actually use these to keep track of my film from shooting, through development to archive. The roll sits on the holder…
Merged two models because I was told I was peeling my prints wrong. This didn't help, but it really seemed like this would be the way. Print with supports and cry removing them all.
