Humidifier Water Flexible Hose Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaced metal tubing with flexible plastic tubing. This part holds the flexible tubing in place.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The valve on an old humidifier failed and was replaced. The new valve had ¼" for both the inlet and outlet tubing. The copper intake from the old valve was ¼" with a larger diameter output for the metal tubing and would not work with the new valve. New ¼" plastic tubing was used to replace the metal tubing but needed a printed part to hold it in place.
This model was printed with TPU and used to hold the new ¼" tubing in place. The part was inserted into the bottom of the humidifier cap. The hose was put through the part, and everything is held in place with a zip tie.
The parametric model was designed in FreeCAD and can be adjusted for different use needs.