Humidifier Water Flexible Hose Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaced metal tubing with flexible plastic tubing. This part holds the flexible tubing in place.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The valve on an old humidifier failed and was replaced. The new valve had ¼" for both the inlet and outlet tubing. The copper intake from the old valve was ¼" with a larger diameter output for the metal tubing and would not work with the new valve. New ¼" plastic tubing was used to replace the metal tubing but needed a printed part to hold it in place.
This model was printed with TPU and used to hold the new ¼" tubing in place. The part was inserted into the bottom of the humidifier cap. The hose was put through the part, and everything is held in place with a zip tie.
The parametric model was designed in FreeCAD and can be adjusted for different use needs.