Roller / Idler / Pulley wheel for filament roll storage / dispenser drybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A roller with a press-fit bearing useful for rolling out / dispensing filament from a drybox. Supports a 2.2kg roll.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This idler pulley / roller is made to roll freely while supporting a roll of filament. It takes a 608 cartridge bearing with a 8mm (5/16") bore.
The rolling surface is 28.6mm (1-1/8") in diameter.
Also included is a bearing insertion and removal tool useful to press a bearing in. Use two stacked tools get the bearing back out again.
Compatible with the following bearings:
To purchase these pre-made in different colors and materials, you can purchase them ready-made at:
https://hkern0.etsy.com/listing/1823252618/roller-idler-pulley-with-sealed
For a video on how to use the bearing tool to press a bearing in or out, see: