Simple Pincer Claw For FTC with 5mm REV Hex Bore
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple Pincer for a Claw that can be used in FTC and is compatible with the rev 5mm hex bore...
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple pincer for a claw that can be used in FIRST tech challenge competitions. It was developed by me, the designer for InstantBot, team 26251 FTC. It contains the Rev 5mm hex bore (with some tolerance) for those axles. It was used in IntoTheDeep, and works fairly well.
WARNING: THESE TOLERANCES WILL PROBABLY NOT MATCH YOUR PRINTER! RECOMMEND EDITING MODEL.
My print settings (You can try yours, this took me approx. 30 seconds to design, very simple).
-PLA (Creality Basic PLA)
-Bambu Lab P1S Combo
-No brim
-No support